8N4SV76EC-0029CDI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable timers and oscillators are a type of integrated circuit (IC) used to generate timed intervals or create an oscillating signal. The 8N4SV76EC-0029CDI is a programmable timer and oscillator that can be used in a variety of applications, including clock synchronization, signal measurement and instrumentation, and other timer-based applications.

Overview of 8N4SV76EC-0029CDI

The 8N4SV76EC-0029CDI is an integrated circuit that combines a programmable timer, oscillator, and comperator (PTC). It is an expandable, multi-channel timer and uses a signal point-of-service (SPOS) architecture to allow the timer to be programmed with up to 8 different channels of different time intervals. The 8N4SV76EC-0029CDI also includes a programmable duty cycle generator (PDCG) and progammable logic resources (PLR) for generating multifies and switching logic circuits. This device can also be used to modify, configure, and program the timing parameters of the PTC, PDCG, and PLR.

Applications

The 8N4SV76EC-0029CDI can be used in a variety of applications. It can be used in clock synchronization applications, where oscillators that generate pulses at specific frequencies are needed. This device can also be used in signal measurement and instrumentation applications, where the intervals between signals need to be exactly measured. Additionally, the device can be used in other timer-based applications, such as timer circuitry, split timing control, pulse width modulation (PWM), and frequency division.

Working Principal

The 8N4SV76EC-0029CDI works by measuring the length of time of its time intervals. A timer consisting of an oscillator, counter, and clock is used to measure the time intervals and generate a signal at the end of the interval. This signal is then used to trigger an operation. The oscillator is used to generate the clock signal that is used to keep track of the timing intervals. The counter is used to count the number of clock cycles that pass during the interval. The clock is used to keep track of the current interval and reset the counter when it reaches the end of the interval.

The 8N4SV76EC-0029CDI has programmable timer and oscillator resources that can be used to modify the interval of the timer. This can be done by setting the clock frequency, counter size, and trigger mode. The clock frequency determines how fast the timer runs and is determined by the frequency of the oscillator. The counter size determines how many clock cycles have to pass before the signal is generated. Finally, the trigger mode determines what triggers the signal.

The 8N4SV76EC-0029CDI also includes a programmable duty cycle generator (PDCG). The PDCG is used to generate a pulse in order to control an output signal. This pulse can be configured to have different widths and frequencies based on the inputs presented to the PDCG.

The 8N4SV76EC-0029CDI also has programmable logic resources (PLR) that can be used to create logic circuits. The PLR allows the configuration of Boolean logic functions such as AND, OR and NOT. This can be used to control the output of the timer and generate complex timing control and switching.

In summary, the 8N4SV76EC-0029CDI is a programmable timer and oscillator that can be used in a variety of applications. It features a programmable timer, oscillator, and comperator, as well as a programmable duty cycle generator and programmable logic resources to create complex timing control and switching. It can be used in applications such as clock synchronization, signal measurement, instrumentation, timer circuitry, split timing control, pulse width modulation, and frequency division.

The specific data is subject to PDF, and the above content is for reference