Allicdata Part #: | 8STV-04-006-ND |
Manufacturer Part#: |
8STV-04-006 |
Price: | $ 3.28 |
Product Category: | Connectors, Interconnects |
Manufacturer: | TE Connectivity AMP Connectors |
Short Description: | CONN BARRIER STRIP 4CIRC 0.438" |
More Detail: | 4 Circuit 0.438" (11.12mm) Barrier Block Connector... |
DataSheet: | 8STV-04-006 Datasheet/PDF |
Quantity: | 1000 |
400 +: | $ 2.98620 |
Top Termination: | Screws with Captive Plate |
Material Flammability Rating: | UL94 V-0 |
Material - Insulation: | Thermoplastic |
Operating Temperature: | -40°C ~ 120°C |
Mounting Type: | Chassis, Panel |
Terminal Screw Finish: | Zinc |
Terminal Screw Material: | Steel |
Color: | Black |
Features: | Flange |
Barrier Type: | 3 Wall (Tri) |
Bottom Termination: | Solder Turret |
Series: | #8, Buchanan |
Wire Gauge: | 10-18 AWG |
Voltage Rating: | 600V |
Current Rating: | 30A |
Number of Rows: | 1 |
Pitch: | 0.438" (11.12mm) |
Number of Wire Entries: | 4 |
Number of Circuits: | 4 |
Terminal Block Type: | Barrier Block |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Barrier Blocks come in many sizes and shapes and can be used to carry a wide variety of different signals. The 8STV-04-006 terminal blocks fall into this category and they can be used for various applications. This article will discuss the typical signal types for which this type of terminal block is best suited, its working principle and also how to set up the connectors.
Application Fields
The 8STV-04-006 terminal blocks are suitable for use in a variety of application fields. It is most commonly used in telecommunications, such as telephone exchanges, automatic telephony systems, and computers, and in industrial automation. Since the 8STV-04-006 is a barrier block, it is often used when there is a need to insulate signals from the environment and guard them against interference.
This type of terminal block is also frequently used in energy distribution systems where it is necessary to protect low-voltage and low-current signals from being lost in the environment. They are also used in the automation and medical industries when it is important to avoid the danger of electrocution and for current-limiting functions.
Working Principle
The 8STV-04-006 terminal blocks are designed for a variety of jobs but they are mainly intended for signal transmission. This is achieved by insulating the signal conductor from the ground and from other conductors. This is done by sandwiching a thin barrier material between two insulating layers. This creates a barrier between the signal and the environment, thus protecting it.
The 8STV-04-006 terminal blocks come with two connectors that are connected by a screw. This allows the user to easily attach the incoming signal lines to the conductors of the terminal block. The screw also acts as a strain relief for the conductor.
There are also a number of other features designed into the 8STV-04-006 terminal blocks to ensure reliable signal transmission. These include vent slots that allow heated air to escape and protect the components from overheating, a spring-clip connection system to ensure secure and reliable contact, and an internal PCB to ensure distortion-free signals.
How to Set Up the Connectors
Setting up the 8STV-04-006 terminal blocks is fairly straightforward. The first step is to identify the terminals that will be carrying the signal. These terminals are usually labeled as such and can be identified by their color. Next, the signal wires should be connected to the appropriate terminal. If the wires are thicker, a crimping tool should be used to secure them in place.
Once the signal is connected to the terminal, the insulation sleeve should be fitted on the signal wire. This will protect the signal from interference and damage. After the insulation sleeve is fitted, the terminal block should be securely fastened to the board. Finally, the nylon shroud should be fitted over the entire unit. This shroud will protect the signal wire from becoming detached from the terminal blocks during use.
The 8STV-04-006 terminal blocks are a great choice for many applications and signal transmission needs. They offer superior insulation and connection security, and can be set up quickly and securely. They are also an economical option when compared to other types of terminal blocks.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
8STV-03-006 | TE Connectiv... | 4.49 $ | 1462 | CONN BARRIER STRIP 3CIRC ... |
8STV-09-006 | TE Connectiv... | 7.75 $ | 1000 | CONN BARRIER STRIP 9CIRC ... |
8STV-10-006 | TE Connectiv... | 7.75 $ | 1000 | CONN BARRIER STRP 10CIRC ... |
8STV-02-006 | TE Connectiv... | 1.37 $ | 1000 | CONN BARRIER STRIP 2CIRC ... |
8STV-05-006 | TE Connectiv... | 3.91 $ | 1000 | CONN BARRIER STRIP 5CIRC ... |
8STV-04-006 | TE Connectiv... | 3.28 $ | 1000 | CONN BARRIER STRIP 4CIRC ... |
TERM BLOCK BARRIERCircuit Connector,
TERM BLOCK BARRIERCircuit Connector,
CONN TERM BLK WW BARR 8POLE8 Circuit 0.2...
CONN TERM BLK EX BARR 2POLE2 Circuit 0.3...
CONN TERM BLK EX MT END 5POLE5 Circuit 0...
CONN TERM BLK EX MT END 2POLE2 Circuit 0...