8T49N004A-064NLGI8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

• 8T49N004A-064NLGI8 application field and working principle

Clock/Timing - Clock Generators, PLLs, Frequency Synthesizers

Introduction

The 8T49N004A-064NLGI8 is a high performance 4-pin Clock Generator that is used in a wide variety of applications and is optimized to solve the very toughest timing requirements. Embedded within these tough parameters of small form factor, low power and highly efficient clock generation is its application field. In this article, the different modes and capabilities of this power efficient device will be discussed and the applications. Moreover its working principle will also be discussed.

Application Field

The 8T49N004A-064NLGI8 Clock Generator has two modes which are the normal and low power. In the normal mode, it has the ability to generate a clock signal from the crystal oscillator, which can be programmed from the external register. It also offers additional features such as the ability to output a clock signal from an onboard PLL, adjust the duty cycle of the output clock, and other features as well. The low power mode does not have all of the features as the normal mode, but is still able to generate a clock signal from the crystal oscillator that can still be programmed. The 8T49N004A-064NLGI8 is used in a variety of applications, ranging from industrial and medical, to consumer, gaming and automotive.

Industrial and Medical

The 8T49N004A-064NLGI8 is used in a wide variety of industrial and medical devices due to its precise clock timing abilities. This can be used in medical imaging devices, where precise timing and accuracy are key. It is also used in laboratory equipment and other equipment requiring precise timing and precise control of frequency.

Consumer

The 8T49N004A-064NLGI8 has the ability to generate precise timing and frequency, which makes it ideal for consumer electronics. It is used in consumer electronics such as smartphones, tablets, gaming consoles and set top boxes.

Gaming

The 8T49N004A-064NLGI8 is used in gaming consoles to generate timing signals that are crucial for these devices. It is used to synchronize the CPUs and GPUs, which are used to process data and render graphics. It is also used to generate timing signals that are used to synchronize audio and video signals.

Automotive

The 8T49N004A-064NLGI8 is used in a variety of automotive applications, such as engine control modules, powertrain control systems and audio/visual systems. It is used to generate precise timing signals that are used in all of these applications.

Working Principle

The 8T49N004A-064NLGI8 is a clock generator that uses a frequency synthesizer to generate a clock signal from an input crystal oscillator or external clock signal. It can generate a variety of different output clocks, depending on the frequency of the input clock and the settings that have been programmed into the registers. The clock generator can be programmed to generate clock signals of any frequency and duty cycle. The frequency synthesizer is a type of phase-locked loop that uses a feedback system to lock onto the input clock and generate a precisely controlled output clock.

The 8T49N004A-064NLGI8 uses a voltage-controlled oscillator (VCO) to generate the output clock. The VCO is the center of the frequency synthesizer, and its output frequency can be changed by changing the voltage that is applied to it. The VCO is connected to a loop filter, which is used to filter out any unwanted frequencies from the input signals. The loop filter is also connected to a reference source, which is used to provide an exact frequency to the VCO, and to keep the voltage applied to it in a desired range. The reference source is then connected to the feedback system, which is used to compare the output of the VCO to the input clock, and adjust the voltage applied to the VCO in order to keep the output frequency the same as the input frequency.

Conclusion

The 8T49N004A-064NLGI8 is a high performance 4-pin Clock Generator that can generate precise timing and frequency signals. It is used in a wide variety of applications, ranging from industrial and medical, to consumer, gaming and automotive. It has two modes, normal and low power, with different capabilities. The 8T49N004A-064NLGI8 uses a frequency synthesizer to generate an output clock signal from an input signal. The frequency synthesizer is based on a voltage-controlled oscillator, loop filter and feedback system, which are used to keep the output signal in sync with the input signal.

The specific data is subject to PDF, and the above content is for reference