90500-3012

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat flexible connectors, sometimes abbreviated as FFC or FPC connectors, are particularly useful for applications that require small board-to-board, or board-to-flex cable assemblies. They are both physically and electrically superior to other products on the market due to their physical design, low profile, and lightweight. Characteristically, an FFC or FPC connector is constructed from two elements, a flat flexible cable and a connector, with the connectors being typically composed of plastic holders, to which the flat flexible cable is attached. The flat flexible design of the cable allows it to carry power and/or signals within confined spaces, while remaining rugged enough for high-vibration, low-current interconnection applications.

The primary advantages of FFC and FPC connectors lie in their small size and high flexibility in comparison to traditional wire harnesses and rigid board connectors. This makes FFC/FPC connectors especially attractive for a wide range of applications, from computers to airplanes, and they are particularly useful in areas where reliability and assembly time are critical. FFC/FPC connectors also allow for a high degree of signal quality and signal integrity in comparison to their larger counterparts. In addition, their flexibility, as well as the ability to match desired designs, allows them to fit within tight spaces and around tight curves more easily than wire harnesses or rigid board connectors.

When selecting an FFC/FPC connector for a particular application, it is important to take into consideration the physical limitations of the cable. For instance, the cable needs to be of appropriate length and width in order to fit within the available space. In addition, depending on the exact application, the FFC/FPC connector may have to be able to handle high vibration levels and low-current interconnects. When selecting a connector, it is important to pay close attention to its rated current and voltage capability, as well as its dielectric properties, electrical characteristics, and environmental tolerance.

The two main types of FFC/FPC connectors are the ZIF and non-ZIF types. The ZIF, or zero insertion force, connectors use a special locking mechanism, usually in the form of a sliding latch, to secure the connector and cable in place. Non-ZIF connectors rely more on the connection system, such as soldering or crimping, to ensure proper connection. It is important to select a connector that matches the required voltage, current, environmental conditions, and cable and board design.

In terms of their working principle, FFC and FPC connectors are meant to transmit electrical signals between two or more contact points. To do this, they typically have a series of contact points on both the flat flex cable and the connector in which the cable is attached. Depending on the type of connector used, these contact points can be either interdigitated or made out of a conductive material. When the cable is attached to the connector, the signal propagates from the contact point through the cable to the other contact point.

FFC/FPC connectors offer numerous advantages in terms of size, flexibility, and performance. These advantages make them an ideal choice for a wide variety of applications, from computers to airplanes. They are especially useful in areas where reliability and assembly time are critical. By carefully selecting an appropriate connector and cable, based on the physical and electrical requirements of the application, designers can maximize the performance of their FFC/FPC system.

The specific data is subject to PDF, and the above content is for reference