9050-100-0008

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electromagnetic interference/ Radio Frequency Interference (EMI/RFI) Filters (LC, RC networks) are devices used to filter out undesired electrical noise produced by electronic devices. These filters are necessary to reduce or completely eliminate the amount of radiated emissions so that they do not disrupt the normal operation of other electronic systems. The 9050-100-0008 is one such filter, it has numerous practical applications and utilizes circuit techniques such as inductance-capacitance (LC) and resistance-capacitance (RC).

The 9050-100-0008 filter is part of a family of EMI/RFI filters and it is designed for use in high power applications. It features a two-channel, full-wave, bidirectional filter, with a single series-connected inductor plus one RC network for each direction. The filter is housed in a shielded aluminum enclosure and is capable of an attenuation of over 55dB. This filter is ideal for applications such as heavy electric shocks and high-speed switching in industrial control circuits.

The working principle of the 9050-100-0008 filter is based on the fact that a linear current-controlled capacitance is (to a first approximation) independent of frequency. When an harmonic frequency current is applied to an filter, the capacitance at any frequency significantly different than the harmonic frequency will be almost equal to zero. This means that only frequencies close to the harmonic frequency will pass through the filter.

The LC circuit of the 9050-100-0008 filter consists of two inductors connected in series, and a capacitor connected to the ground. The inductors have a high self-resonant frequency, allowing them to reject noise frequencies higher than their self-resonant frequency. The capacitor is necessary to reduce the network\'s inductive reactance at lower frequencies. The RC network consists of a resistor in series with a capacitor, and is designed to reject noise frequencies lower than its self-resonant frequency. This is achieved by making the capacitor have a higher reactance than the resistor at that frequency.

Another application of the 9050-100-0008 filter is in power supplies. It can be used to filter out EMI/RFI noise present on the power line before it enters the power supply. This will ensure that the power supply remains stable and does not become a source of EMI/RFI radiation to other electronic devices. The 9050-100-0008 filter can also be used for data line protection. It can be used to reduce spikes and noise present on a data line so that reliable data transmission is achieved.

The 9050-100-0008 filter is an effective and economical filter suitable for a variety of applications. Its design uses LC and RC networks to provide a high level of EMI/RFI attenuation. The filter is housed in a shielded aluminum enclosure that provides additional EMI/RFI protection. It is also suitable for applications such as heavy electric shocks and high-speed switching in industrial control circuits, and can be used for power line filtering and data line protection.

The specific data is subject to PDF, and the above content is for reference