90J130

Series:	90
Packaging:	Bulk
Part Status:	Active
Resistance:	130 Ohms
Tolerance:	±5%
Power (Watts):	11W
Composition:	Wirewound
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	±30ppm/°C
Operating Temperature:	--
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.343" Dia x 1.811" L (8.70mm x 46.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>Through Hole Resistors are found in nearly every electronics application, from simple volume controls in consumer electronics to complex applications in medical devices and even industrial control systems. The 90J130 application field and working principle is just one example of how these resistors can be used in a wide range of applications.</p><p>The 90J130 Through Hole Resistor is made of a 1.1K ohm resistor, 1 watt rating, and an SMT patch. This type of resistor can be used in applications that require a high level of precision and accuracy, as its tolerance range is from plus or minus one percent. It also has a temperature coefficient of 50 ppm which means that its resistance is stable over a wide range of temperatures. The SMT patch increases the rate of heat dissipation, enabling the resistor to perform its task more effectively and accurately.</p><p>The most common use of the 90J130 resistor is in power supplies. As power supplies require high resistance in order to maintain a constant voltage, this type of resistor is popular for use in these devices. Power supplies usually consist of an input side, which is connected to a power source, and an output side, which is connected to components to which the power is being supplied. The 90J130 resistor is placed between the input and output side, and acts as a buffer to ensure that the voltage supplied to the components is constant and accurate.</p><p>In addition to power supplies, the 90J130 resistor can also be used in measurement instruments, such as thermocouples and odometers. This type of resistor is suitable for use in these instruments as its resistance range is wide and it is able to maintain its accuracy throughout a wide range of temperatures. It can also be used in voltage dividers, where it helps to ensure that the correct voltage is supplied to the components.</p><p>The 90J130 Resistor also has a wide application in motor control circuits, which require the application of voltage to produce a specific amount of torque. In this scenario, the 90J130 resistor is used to regulate the voltage applied to the motor, ensuring that the desired torque is achieved. This type of resistor is also used in a wide range of other circuits, including audio amplifiers, LED lighting applications, radio receivers and other types of electronic circuits.</p><p>The working principle of the 90J130 resistor is that it acts as a low resistance shunt between two points in a circuit. The current flowing through the resistor will be reduced, as a result of the resistance, allowing for more precise control of the voltage. The amount of resistance can be adjusted by changing the value of the resistor, depending on the application in which it is being used. For example, if a higher voltage is required, a higher value resistor can be used.</p><p>Through Hole Resistors are an essential component in any electronics device, as they are often relied upon for providing accuracy and stability. The 90J130 resistor is one of the most widely used resistors, and is found in a variety of applications from consumer electronics to industrial control systems. Its ability to resist voltage fluctuations and its temperature independence makes it a reliable component that can be used in a variety of applications.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description