9204202XC

Voltage - Supply, Dual (V±):	±15V
Supplier Device Package:	16-Flatpack
Package / Case:	FlatPack
Operating Temperature:	-55°C ~ 125°C (TA)
Crosstalk:	--
Current - Leakage (IS(off)) (Max):	500pA
Channel Capacitance (CS(off), CD(off)):	3pF, 14pF
Charge Injection:	20pC
-3db Bandwidth:	--
Switch Time (Ton, Toff) (Max):	150ns, 150ns
Series:	--
Voltage - Supply, Single (V+):	--
Channel-to-Channel Matching (ΔRon):	15 Ohm (Max)
On-State Resistance (Max):	100 Ohm
Number of Circuits:	2
Multiplexer/Demultiplexer Circuit:	4:1
Switch Circuit:	SP4T
Part Status:	Obsolete
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 9204202XC is a family of devices that provides various Control and Function Multiplexers to allow an engineer to control many devices with a single input. With this family, the user is able to control the power supply, with one digital input. This type of device is useful in system-level applications where the goal is to reduce layer complexity. Within this family, there are different types of Control and Function Multiplexers: Analog Switches, Multiplexers, Demultiplexers and Chopper Switches.

Analog Switches

Analog Switches are used to route an analog signal from one destination to another. They provide a low-level switch (LVS) which can be applied to control the direction of the signal flow. These switches are designed for high-speed, wide-frequency range applications such as oscillators, voltage- or mode-controlled amplifiers, digital/analog converters, power supplies, and various audio systems. This type of switch is characterized by its low voltage drop, low distortion, and high speed response.

Multiplexers

The multiplexer is used to route electrical signals from one common source to multiple destinations. The multiplexer switch can be used in a variety of applications such as digital-to-analog converters, analog-to-digital converters, RF signal processing and power management circuits. The multiplexer switch can be used to select between different digital inputs.

Demultiplexers

Demultiplexers are used to route electrical signals from multiple sources to one common destination. Demultiplexers are used to select between different inputs, and can be used for data multiplexing and demultiplexing in communications systems, digital signal processing, and RF signal processing. They are also used in power management circuits to control the direction of the electrical signals.

Chopper Switches

Chopper switches are analog switching devices which are used to route electrical signals. They use chopping technique to switch an analog signal, which means that two transistors are used to alternately charge and discharge an inductor. The inductor is used to store temporarily the electrical signals, so that the signal can pass through the switching devices. Chopper switches are mainly used in power management circuits.

Conclusion

The 9204202XC family of devices can be used for a variety of applications. It provides various Control and Function Multiplexers, such as Analog Switches, Multiplexers, Demultiplexers and Chopper Switches, to meet the specific application needs. The family of devices is designed to reduce system complexity and to provide the most efficient way to control the power supply with one digital input. With the wide range of control and function multiplexers, this type of device is useful in various applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description