965570-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 965570-1 application field and working principle are wide and varied, but the main purpose of the device is to provide a degree of control over the various electronic circuits it is designed to protect. The main characteristics of this type of protection system are the ability to sense the presence of an overvoltage and to switch off the circuit in the event of an overvoltage. It is also designed to detect the presence of an undervoltage, and to switch off the circuit in the event of an undervoltage.

The 965570-1 is a type of circuit protector and is commonly used in industrial and consumer applications. In these applications, the device is used to protect electrical components from damage caused by unexpected overvoltage and undervoltage. By providing the circuit protection, the device prevents costly repairs and potentially dangerous electrical fires.

The protection system uses a number of components including a ground fault protection (GFP) device, a voltage detector, and an overvoltage or low voltage protection (LLP) circuit. The GFP device is used to monitor the voltage on the circuit and to detect any abnormality in the voltage. If an abnormality is detected, then the GFP device will trigger the voltage detector to activate the overvoltage or low voltage protection circuit.

Once the overvoltage or low voltage protection circuit is activated, then the circuit is disabled and the voltage on the circuit is safely discharged. This helps to prevent any further damage caused by the overvoltage or undervoltage, and also helps to reduce any potential risks associated with the circuit.

The 965570-1 works on the principle of resistance. The device is designed to provide a degree of resistance against the flow of current when it detects an overvoltage or an undervoltage. This resistance is normally provided by a component called a resistor. The resistor works by reducing the amount of current that can pass through the circuit when a voltage is detected.

The resistor is connected to the voltage detector and is used to measure the amount of voltage on the circuit. When the voltage is detected, the resistor is adjusted so that it decreases the amount of current that can flow through the circuit. This helps to protect the components of the circuit from any overvoltage or undervoltage. In addition, the resistor also helps to prevent any short circuits in the circuit.

The 965570-1 is also used to provide overvoltage protection when the voltage on the circuit exceeds a certain threshold. This threshold is set by the voltage detector. When the voltage on the circuit exceeds the set threshold, then the detector will activate the overvoltage or low voltage protection circuit. The protection circuit is then used to reduce the voltage on the circuit, thus preventing any damage caused by the overvoltage.

The 965570-1 is an important technology for protecting electronic circuits from unexpected and potentially damaging electrical surges or spikes. This technology is widely used in many industrial and consumer applications, and is considered essential for the safety of electrical components and circuits. This type of protection system is relatively easy to install, and can be used in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference