998457

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 98475 application field is quite broad and its working principle can be pretty complex. To put it simply, 98475 is an oscilloscope measurement tool specifically designed to measure the electrical characteristics of a range of materials. Using an AC current, the aim of the readings collected by the 98475 is to measure the voltage, current, resistance, and capacitance of a material. It uses three different test configurations to collect readings from materials, which span a range of frequencies, from 100 Hz to 20 MHz.

The 98475 test system works by passing a known AC test signal through the material being tested and measuring the results, thus providing the required material properties. The three different test configurations used by the 98475 are TEM (Transverse Electromagnetic Mode), Static, and Periodic. For each mode, there is a dedicated test loop which allows different test frequencies and characteristics to be chosen.

TEM testing involves passing a known AC current through a special \'loop\' in the test material, which is specially designed to measure the characteristics of the material. This loop is placed between two electrodes, one sending a known signal and the other measuring the response. The measured characteristics are then used to calculate the TEM properties of the material.

Static testing uses a single loop to measure the static properties of the material. This is done by passing an AC current through the material and measuring the voltage across the terminals. The voltage readings collected by the 98475 can then be used to calculate the static electrical characteristics of the material.

Periodic testing is used to measure the capacitance of a material by passing a known AC signal through the loop. The periodic test signal is used to measure the capacitive properties of the material, such as its capacity and conductance. The readings taken from the periodic test signal are then used to calculate the capacitance of the material.

The 98475 testing system is a useful tool for any engineer looking to measure the electrical characteristics of any type of material. It is a versatile tool that can be used for a range of applications, from the testing of insulators and conductors, to measuring the parameters of printed circuit boards. Thanks to its precise readings, the 98475 system can be used to measure the most minute of changes in a material\'s characteristics, providing engineers with an invaluable source of data.

The specific data is subject to PDF, and the above content is for reference