A190RPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The A190RPB is a single-phase diode rectifier that is used in a variety of industrial, commercial, and telecommunications applications. It is a robust, low-noise rectifier with a low forward voltage drop and a fast reverse recovery time. The A190RPB is designed to rectify single-phase AC voltages in the range of 60-400 volts and is rated to handle up to 20 amperes of current.

The A190RPB rectifier employs a silicon diode, which consists of a single P-type semiconductor layer sandwiched between two N-type layers. When an AC voltage is applied across the rectifier, the diode acts as a one-way valve that only allows current to flow in one direction (from the P side to the N side). This allows the rectifier to convert the incoming AC voltage into DC voltage. The amount of current that can be delivered by the rectifier depends on the voltage level and the load current.

When no-load conditions are present, the rectifier is in a “zero-crossing” state and its output voltage is zero. When a load is connected, the rectifier begins to operate in its linear mode. This is where the incoming AC voltage is rectified into an almost-constant output voltage. However, due to the internal resistance of the diode, some amount of voltage drop across the rectifier will occur. The voltage drop is dependant on the load current and is typically in the range of 0.5-1.5 volts.

When the diode encounters a negative voltage spike in the incoming AC voltage, it can be exposed to reverse-bias conditions. The reverse-bias voltage allows current to flow in the opposite direction, which can cause damage to the diode. To protect the rectifier from these spikes, a freewheeling diode (also known as a flyback diode) is connected in parallel with the rectifier. This diode allows the current generated by the negative spikes to travel through it instead of through the rectifier, avoiding any damage.

The A190RPB rectifier is used in a variety of industrial, commercial and telecom applications, such as power supplies, UPS systems, inverters, motor controllers, lamp dimmers and load controllers. It is also used in various consumer applications, such as power adapters, circuit breakers and transformers. This robust and reliable rectifier is designed to provide years of dependable performance and dependable power conversion.

The specific data is subject to PDF, and the above content is for reference