A42MX36-1CQ256B

Series:	MX
Part Status:	Active
Total RAM Bits:	2560
Number of I/O:	202
Number of Gates:	54000
Voltage - Supply:	3 V ~ 3.6 V, 4.5 V ~ 5.5 V
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 125°C (TJ)
Package / Case:	256-BFCQFP with Tie Bar
Supplier Device Package:	256-CQFP (75x75)
Base Part Number:	A42MX36

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Embedded - FPGAs (Field Programmable Gate Arrays) are widely popular for their flexibility and cost-effectiveness. They offer a cost-effective alternative to traditional circuit boards and so have become one of the most widely used technologies in the industry.The A42MX36-1CQ256B is a configurable device from Semtech Corporation that offers the highest performance level of in the A42MX36 series of embedded FPGAs. It is designed for embedded applications requiring reduced power consumption and high CQ speed. The device is a powerful 64-bit core with an optimum mix of registers and fully configurable input/output ports.

Architecture and Features

The A42MX36-1CQ256B is based on the modular architecture of Semtech’s Armor Core family. This architecture is optimized for embedded applications such as industrial automation and embedded systems. It increases system performance by providing multiple clock speeds, an optimized register map and a low-power, highly advanced instruction set.The device features advanced features such as a 9-stage, dual-port pipeline for simultaneous reads and writes, and a configurable port for connecting to other interfaces. It also allows for memory sharing, making it ideal for embedded applications. Additionally, the device has two internal Virtex-PowerPC cores and supports a variety of configuration tools.

A42MX36-1CQ256B System Performance

The A42MX36-1CQ256B offers a wide range of processor-level performance metrics. It has two cores that are capable of executing instructions at 200 MHz and 4 million instructions per second. The device can operate in a range of temperature and operating conditions, with up to 72-time low-power embedded performance. Furthermore, the device can be adapted to fit into different environments without changing the instruction set.

A42MX36-1CQ256B Application Fields

The A42MX36-1CQ256B is an ideal choice for embedded applications, and can act as the basis for a number of projects. Its features make it suitable for a variety of tasks, including industrial automation, digital audio and video streaming, and communication networks. Its low-power and performance allow it to reduce device size and power usage, resulting in a smaller system footprint and reduced cost.The device can also be used in medical, automotive and security application fields. In medical applications, the device can be used for medical imaging, wound healing and monitoring, and minimally-invasive surgery. In automotive applications, it can be used to control vehicle settings, monitor vehicle performance, and provide navigation and entertainment features. In security applications, it can be used for access control and monitoring, surveillance and detection, and cryptography and key management.

A42MX36-1CQ256B Working Principle

The A42MX36-1CQ256B operates on a common core architecture, meaning that the core is a shared resource among multiple application and peripheral modules. Each module uses a dedicated thread to access the core and can take advantage of the internal clock, registers and memory. The device uses a single clock to support all its internal operations, allowing for maximum performance and low power consumption.The device also uses a unified data transfer system, which can be used to move data between modules or to external memory or interfaces. It also supports an instruction pipeline, allowing instructions to be executed in parallel. This makes it possible to execute multiple tasks in a single clock cycle, while reducing power consumption.

Conclusion

The A42MX36-1CQ256B is a powerful and highly configurable device from Semtech Corporation. It offers multiple features, including a 9-stage dual-port pipeline, configurable ports and a low-power instruction set. It is an ideal solution for embedded applications, and can be used in a number of industries, ranging from medical and automotive applications to security and entertainment. Its high performance and low power consumption also make it an attractive solution for a variety of projects.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description