ACF321825-221-TD01

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electromagnetic interference (EMI) and radio frequency interference (RFI) can disrupt the functioning of sensitive electronic components. To protect electronic equipment from being adversely affected by these signals, the use of EMI/RFI filters are employed. ACF321825-221-TD01 belongs to the family of EMI/RFI filters, specifically LC, RC Networks.

A traditional LC, RC filter consists of an inductor connected in parallel with a capacitor. This creates a low-pass filter that attenuates higher frequency signals while allowing lower frequencies to pass relatively unaffected. In the ACF321825-221-TD01 filter, the capacitance and inductance values are optimized to achieve the desired filter characteristics. The filter is mounted on a Standard 25mm Snap Track and can be easily fitted onto a board.

The primary application of ACF321825-221-TD01 is in low voltage DC circuits, where it is used to reduce the amount of interference generated by the DC power supply and by other components in the system. This filter attenuates signals in the range from 5kHz to 200MHz. It is also suitable for use in high voltage DC circuits, where it acts as a de-coupling filter to reduce electrical noise. The filter is also recommended for use in automotive applications where it reduces the amount of EMI and RFI in the vehicle.

The working principle of ACF321825-221-TD01 involves two mechanisms. Firstly, it works to reduce the amplitude of the noise. This is done by creating a low-pass filter with a high cut-off frequency. This reduces the amplitude of all frequencies above the cut-off frequency. Secondly, it works to reduce the rate of noise propagation by creating high load impedance to slow down the rate at which noise signals can propagate.

Overall, the ACF321825-221-TD01 filter is an effective solution for reducing the level of EMI and RFI interference in low and high voltage DC circuits. It offers excellent performance in a small package, making it suitable for use in a wide variety of electronic applications. It also offers a relatively simple and economical solution for protecting electronic components from unwanted EMI and RFI.

The specific data is subject to PDF, and the above content is for reference