ACML-0402-241-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite beads and chips refer to the components containing ferrite as the core material, which are often seen in applications such as ACML-0402-241-T.

Ferrite has the characteristics of low hysteresis loss, low cost and continuous frequency range. Therefore, ferrite beads and chips can be used for filtering, coupling, matching, tuning, and impedance adjustment, which are widely used in the fields of telecommunication circuits, microwave circuits, audio circuits and antenna matching.

ACML-0402-241-T is a type of ferrite chip inductor, which is composed of a ceramic core and two winding wires. The ceramic core is usually made by mixing Mn-Zn ferrite and Ni-Zn ferrite, and then processed into a porous chip material with special magnetic properties. And the winding wire is made of enameled copper wire, annealed copper wire or aluminum wire. In use, ACML-0402-241-T ferrite chip is mounted on a circuit board or printed circuit board, and then turned into a device after soldering.

The working principle of ACML-0402-241-T can be described as follows: when the signal is injected into the ferrite chip, the magnetic field generated by the core will cause the current to form a limited spiral path around the core, and at the same time limit the current that is reflected in the connection wire to a certain range. As a result, ACML-0402-241-T functions as a filter, allowing a certain range of frequencies to pass through or to block. It also has the effect of reducing radiated noise and disturbing signals.

In addition, because of its small size, high frequency characteristics and low reactance, ACML-0402-241-T chip inductor has become an indispensable component in the telecommunication, electronics, aerospace and other fields. It is mainly used as a common-mode choke in local area network (LAN) and high frequency signal communication systems, as well as for miniature RFID antenna filters in mobile phone communication tools.

In conclusion, ACML-0402-241-T ferrite chip inductor is a kind of ferrite beads or chips, with the characteristics of low hysteresis loss, low cost and continuous frequency range. It can be used in the fields of telecommunication, electronics, aerospace and other fields for filtering, coupling, matching, tuning and impedance adjustment.

The specific data is subject to PDF, and the above content is for reference