ACML-0603H-310-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite Beads and Chips are widely used in electrical and electronic engineering applications to provide EMI suppression, most commonly in the form of a ferrite bead. The ACML-0603H-310-T is a type of ferrite bead and chip that is designed for the suppression of high frequency noise on a wide range of lines in the spectrum from 0 kHz to 3 GHz.

The ACML-0603H-310-T is primarily used for radio frequency interference (RFI) suppression in computers, telecommunications, and consumer electronics. It is also used in military, aerospace, and medical electronics applications. Its high impedance characteristic and fast rise time characteristics make it well suited for these applications where high frequency noise needs to be suppressed in these systems.

The ACML-0603H-310-T is a ferrite bead and chip designed to be inserted directly in the circuit. It works by acting as an inductor, and it has a wide range of inductance values that can be tailored to the specific application. The inductance of the ACML-0603H-310-T is determined by the size of the bore, the number of turns, and the core material used. This inductance is what causes the high Frequency Noise to be suppressed in the circuit.

The ACML-0603H-310-T is a passive device, and therefore it does not draw power from the circuit. It relies on the current and voltage running through the circuit to create the inductance that it needs to suppress the noise. This means that it does not require any special power supply, and does not require the use of active components.

The ACML-0603H-310-T is designed to have a low insertion loss, meaning that it does not cause any significant signal attenuation in the circuit. This is important, as RFI suppression devices are not typically used to reduce signal strength, but instead to reduce unwanted noise. The insertion loss also helps to reduce power consumption in cases when the device is in series with a device that requires power.

The ACML-0603H-310-T is also designed with a high endurance rating. This helps to ensure that the device does not fail or degrade over time, which is important when used in a wide range of applications where it may be exposed to extreme temperatures, high vibration, or other extreme operating conditions.

The ACML-0603H-310-T is a versatile device and is often used in combination with other protection components such as capacitors, fuses, and surge protectors. This helps to ensure that any high frequency noise present in the circuit is suppressed effectively, while at the same time preventing any damage to other components in the circuit.

The specific data is subject to PDF, and the above content is for reference