ACML-0603H-110-T

Series:	ACML-H
Packaging:	Tape & Reel (TR)
Part Status:	Active
Filter Type:	--
Number of Lines:	1
Impedance @ Frequency:	11 Ohms @ 100MHz
Current Rating (Max):	2A
DC Resistance (DCR) (Max):	30 mOhm
Ratings:	--
Operating Temperature:	-55°C ~ 125°C
Package / Case:	0603 (1608 Metric)
Mounting Type:	Surface Mount
Height (Max):	0.037" (0.95mm)
Size / Dimension:	0.063" L x 0.032" W (1.60mm x 0.80mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Ferrite Beads and Chips are components that are routinely used in electronic and electrical applications. ACML-0603H-110-T is a type of ferrite bead, and is an ideal choice for applications where a high-frequency filtering or dampening is needed. In this article, we will discuss the various applications of ACML-0603H-110-T and its working principle.

Application of ACML-0603H-110-T

The ACML-0603H-110-T ferrite bead can be used in many different electronic components and circuits.One of the most common applications of this type of ferrite bead is in the filtering of high-frequency signals. This is done by placing the component across a component’s terminals, such as that of a capacitor or inductor. The ferrite material of the bead can effectively reduce the current running through the circuit, thus minimizing the amount of interference that passes through. This type of filtering is especially useful for applications where a high-frequency signal needs to be blocked or controlled.Another application of the ACML-0603H-110-T is that it can be used to dampen the effects of electrical noise. This is accomplished by placing the component across two points on the circuit. The ferrite material of the bead absorbs the noise, allowing the rest of the circuitry to operate more smoothly. This type of dampening is particularly useful in applications where noise must be minimized, such as computer audio cards, audio equipment, and digital imaging systems.In addition, the ACML-0603H-110-T can be used to reduce electromagnetic interference (EMI) in electronic components. This is done by placing the component in a position where it is close to the components that are causing the emission of the EMI. As the bead absorbs the EMI, it helps to prolong the life of the affected components and reduce the interference that may interfere with other electronic products.

Working Principle of ACML-0603H-110-T

The working principle behind the ACML-0603H-110-T ferrite bead is quite simple. The ferrite material contained within the component is essentially a special form of ceramics which are made up of small, magnetic pieces of iron. When an electrical signal runs through the circuit, the electrons that carry the current interact with the ferrite material contained within the bead. As the electrons pass through the ferrite material, they are disrupted and scattered. This disruption acts as a filter, preventing higher-frequency signals from passing through and allowing only the lower-frequency signals to pass through to the rest of the circuit. The ferrite material within the bead also possesses the ability to absorb electrical noise, allowing the rest of the circuitry to run more smoothly. This is accomplished by the absorption of the electrons that contain the electrical noise, preventing them from passing through to the rest of the circuit. Finally, the ferrite material contained within the bead also possesses the ability to absorb electromagnetic interference from other components or external sources. This is done by absorbing the EMI energy, preventing it from passing through to the rest of the circuit and interfering with the functionality of other components or electronic products.

Conclusion

In conclusion, the ACML-0603H-110-T ferrite bead is an ideal choice for applications where a high-frequency filtering or dampening is needed. It can effectively reduce the current running through a circuit, reduce electrical noise, and absorb EMI. Additionally, the working principle behind this component is quite simple, with the ferrite material contained within the bead acting to filter higher-frequency signals, absorb electrical noise, and absorb EMI.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description