ACNT-H50L-000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators provide the electrical insulation between the input and output of two circuits. The ACNT-H50L-000E optoisolator is a transistor photovoltaic output type optoisolator with an input current of 4mA. It is designed for use in a wide range of applications such as motor control, programmable logic, instrumentation, consumer electronics, telecommunication, automotive, and industrial sensors.

This optoisolator has two main components: a phototransistor and a light source. The phototransistor is an electronic component which consists of a semiconductor device with an internal base, collector and emitter regions. The phototransistor is connected to the input circuit through its base and its collector is connected to ground.

The light source is typically made of a light-emitting diode (LED). The LED is connected to the input circuit through its anode and its cathode is connected to ground. When a voltage is applied to the input circuit, the LED emits light which is then detected by the phototransistor. This causes the phototransistor to switch on and off (sink or source), which then causes the output voltage to switch on and off.

This optoisolator is designed to provide reliable and efficient electrical isolation between the input and output circuits. The optoisolator is also designed to provide protection from voltage transients and short circuit current spikes. It also provides protection from reverse voltages and overvoltages. Additionally, this optoisolator provides a low power consumption and high reliability due to its low input current and low standby current.

The ACNT-H50L-000E optoisolator is used in many applications. It can be used to control motors, provide protection against voltage transients, control programmable logic, and provide high voltage isolation for instrumentation and automotive electronics. Its low power consumption makes it suitable for use in consumer electronics and telecommunication applications. Additionally, its high reliability and low standby current make it ideal for use in industrial sensors.

In summary, the ACNT-H50L-000E optoisolator is a transistor photovoltaic output type optoisolator with an input current of 4mA. It is designed to provide reliable and efficient electrical insulation between the input and output circuits and provide protection from voltage transients and short circuit current spikes. It is suitable for use in a wide range of applications such as motor control, programmable logic, instrumentation, consumer electronics, telecommunication, automotive, and industrial sensors.

The specific data is subject to PDF, and the above content is for reference