ACNT-H61L-500E Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Logic Output devices, such as the ACNT-H61L-500E, are used to isolate two electrical circuits. There are two main components of an Optoisolator Logic Output device--the input and output. The input is typically made of a transistor, LED, or other photo-situator while the output has a Darlington transistor. This type of device is designed to provide logic level signals and ground isolation between high voltage circuits.

When power is applied to the ACNT-H61L-500E, the LED will be energized. As a result, the output transistor will begin to conduct, allowing a current to flow through the output to the ground when the LED is on. The signal output from the device will then be either on or off depending on the voltage across the LED. When the voltage is high enough, the LED will turn on and the output will be on and when the voltage is too low, the LED will turn off and the output will be off.

Optoisolators - Logic Output devices are commonly used in various applications where electrical isolation between two circuits is required. For example, these types of devices are often utilized in motor driver circuits, relay driver circuits, and PLCs. Furthermore, these devices are especially useful when one circuit must be isolated from a high-voltage, high-current circuit.

In addition to providing isolation between two circuits, Optoisolators - Logic Output devices provide a low value impedance due to their small size. This feature offers several advantages, such as providing a low value output signal that can be combined with other signals, limiting the potential current during short circuit conditions, and increasing the accuracy of signal measurements.

The ACNT-H61L-500E is an opto-electrical device with a 5

The specific data is subject to PDF, and the above content is for reference