ACPL-C79B-000E

Voltage - Input Offset:	600µV
Base Part Number:	ACPL-C79*
Supplier Device Package:	8-SO Stretched
Package / Case:	8-SOIC (0.268", 6.81mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 105°C
Voltage - Supply, Single/Dual (±):	4.5 V ~ 5.5 V
Current - Output / Channel:	11mA
Current - Supply:	13mA
Series:	--
Current - Input Bias:	100nA
-3db Bandwidth:	200kHz
Slew Rate:	--
Output Type:	Differential
Number of Circuits:	1
Amplifier Type:	Isolation
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The ACPL-C79B-000E is a linear amplifier used for instrumentation applications. It is an operational amplifier (Op Amp) with buffers and high power output. The device is capable of amplifying a small signal level to provide a large amount of output power. It is suitable for use in many applications such as audio, power, motion control and data acquisition.

Features

The ACPL-C79B-000E is a high-power output amplifier with a low-voltage supply rating and wide bandwidth. It has wide bandwidth from dc to 2.5 GHz. The device also supports a wide input voltage range from -20V to 60V. The output power range is 0dBm to 17dBm. It also has an extremely large voltage swing capability with the minimum voltage swing being -20V, the peak voltage swing being +60V and the slew rate being 100V/μs. The device has a low distortion level of 0.2%.

Applications

The ACPL-C79B-000E is designed for use in a wide range of instrumentation applications including audio, power, motion control and data acquisition. It is suitable for use in applications such as ultrasound imaging systems, ultrasound diagnosis, medical ultrasound, ultrasound imaging systems, ultrasound imaging systems for observation, ultrasound imaging systems for diagnosis, ultrasound imaging systems for imaging medical applications, ultrasound imaging systems for imaging industry, and ultrasound imaging systems for imaging non-medical applications. The device is also suitable for use in applications such as amplifier stages for medical instrumentation, audio systems, automotive audio systems, aircraft audio systems, Radio Frequency Identification (RFID) systems, power control systems, motor control systems, and data acquisition systems.

Working Principle

The ACPL-C79B-000E works on the principle of linear voltage amplifier. The device uses two transistors M1 and M2 connected in emitter follower configuration. The two transistors are connected in such a way that the input signal is applied to the base of M1 and the output is taken from the emitter of M2. This arrangement provides excellent voltage gain and low output impedance. The device also includes a buffer stage to prevent loading of the signal and distortion of the signal. This buffer stage consists of two transistors connected in cascade configuration. The output of the buffer is connected to the output of the amplifier. The output of the buffer is also connected to the input of the amplifier in order to ensure that the amplifier does not load the signal. To ensure high power output, the ACPL-C79B-000E has a power supply voltage of +60V. The device also has a high-frequency response of up to 2.5GHz. The wide range of the input signal and output power allows the amplifier to be used in many applications.

Conclusion

The ACPL-C79B-000E is a high-power output amplifier with buffers and wide bandwidth. It is suitable for use in many instrumentation applications including audio, power, motion control, and data acquisition. The high power output, low voltage supply rating, wide bandwidth, and wide input voltage range make it an ideal choice for many applications. The principle of linear voltage amplifier, the buffer stage and the power supply voltage allow it to achieve excellent performance in many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description