ACPM-7357-BLK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF amplifiers are electronic devices that are capable of amplifying a signal level from a radio frequency signal source. They are typically used in communication systems to boost signal strength, increase signal range and improve signal quality. The ACPM-7357-BLK is a wideband, high performance amplifier designed for special applications in both commercial and public safety radio frequency bands. This amplifier enables a wide range of applications in small portable wireless applications, such as wireless local area networks (WLAN), wireless point-to-point links, and short-range radio links.

The pin diagram of the amplifier is shown in Figure 1. This device consists of a control pin, RF input, RF output, RF power supply, and the power supply for the bias. The control pin is used to enable/disable the amplifier. This can be used for powering down the unit or to control the gain of the amplifier.

The ACPM-7357-BLK has a low noise figure and is capable of providing high gain and linearity over a frequency range from 0.5 to 3.8 GHz. It provides an adjustable gain of 30 dB with high linearity and low distortion. This amplifier also has an adjustable low-pass filter and adjustable high-pass filter to reduce input and output noise.

The input and output impedance matching of the ACPM-7357-BLK is handled by a feedback loop which provides an adjustable input and output impedance. This is done by varying the bias current through the device. This feedback loop also provides gain control and linearity control.

The ACPM-7357-BLK is capable of providing high linearity when operating in the frequency range of 0.5 to 3.8 GHz. It provides up to 24 dB gain when operating at 0.5 GHz and up to 30 dB gain when operating at 1.8 GHz. The amplifier also provides a low noise figure when operating at 0.5 GHz, and is capable of providing flat gain from 0.5 to 3.8 GHz.

The ACPM-7357-BLK has a power supply requirement of +5V/200mA, and the bias voltage is adjustable from 0V to +7.5V. The total current consumption is less than 0.5A. The device is also capable of providing low intermodulation distortion, and is capable of providing signal linearity and low noise while operating in the frequency range of 0.5 to3.8GHz. The amplifier is also capable of providing excellent immunity to radio frequency interference (RFI) due to its high gain and linearity over the frequency range.

Overall, the ACPM-7357-BLK amplifier offers the desired performance for high power and high linearity applications in the frequency range of 0.5 to 3.8 GHz. This amplifier offers excellent gain and linearity over this frequency range, low power consumption, low intermodulation distortion, and immunity to radio frequency interference. It is an ideal choice for a wide variety of applications in the wireless industry such as wireless local area networks (WLAN), wireless point-to-point links, and short range radio links.

The specific data is subject to PDF, and the above content is for reference