AD746JRZ-REEL7

Current - Input Bias:	110pA
Base Part Number:	AD746
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	0°C ~ 70°C
Voltage - Supply, Single/Dual (±):	9 V ~ 36 V, ±4.5 V ~ 18 V
Current - Output / Channel:	25mA
Current - Supply:	7mA
Voltage - Input Offset:	300µV
Series:	--
-3db Bandwidth:	13MHz
Gain Bandwidth Product:	13MHz
Slew Rate:	75 V/µs
Output Type:	--
Number of Circuits:	2
Amplifier Type:	J-FET
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AD746JRZ-REEL7 Instrumentation, OP Amps, Buffer Amps

The AD746JRZ-REEL7 is a linear amplifier used in a wide variety of applications, including instrumentation, OP amps, and buffer amps. This amplifier is designed to provide a high degree of accuracy, stability, and low noise over a wide range of frequencies. It is well suited for a variety of applications in a wide range of industries.The AD746JRZ-REEL7 uses a complementary metal-oxide-semiconductor (CMOS) process technology and features an exactness of 0.005%. The amplifier has a low voltage input and output range of 1.1V to 5.5V. It also has a wide operating temperature range of –20°C to 85°C.This amplifier can provide an output current of up to 10mA and can deliver up to 5W of power. It has a high common mode rejection ratio, which makes it ideal for use in noisy environments. The output impedance is also very low, which allows for greater amplification without distortion.The AD746JRZ-REEL7 has a variety of applications. It is used in medical instrumentation, such as medical and monitoring devices. It is also used for digital-to-analog and analog-to-digital conversions, logarithmic amplifiers, and test and measurement applications. Additionally, the amplifier can be used in audio systems and power supplies.The amplifier consists of two transistors, a number of resistors, capacitors, and a differential amplifier. It can be used either as a single-ended or a differential amplifier. In single-ended mode, the amplifier provides a high input impedance, low output impedance, and a high gain. In differential mode, the amplifier provides a low input impedance, high output impedance, and low gain.The AD746JRZ-REEL7 also contains two voltage followers; one for the + input and one for the – input. These voltage followers provide a very low impedance path from the inputs to the transistors and allow the amplifier to operate with very low DC offsets.The amplifier is constructed using printed circuit boards, which reduce the number of inter-component connections and provide better insulation against temperature variations and increases in power consumption. The use of surface-mount components and a hermetic package also provide superior thermal performance.The output is an open collector output, as opposed to a closed-loop amplifier. This output has a much lower noise level and can provide higher accuracy. When used as a buffer amplifier, the output impedance is very low, which allows for high signal transfer efficiency. The output of the amplifier can be programmed with either voltage or current, depending on the application. It can also be used as an active filter, allowing signals to be filtered with very little distortion.The AD746JRZ-REEL7 is a rugged, reliable, and accurate amplifier with a wide range of applications. It is easy to use and provides excellent performance. It is suitable for use in a wide range of industries and is an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description