AD8216WYRZ-R7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AD8216WYRZ-R7 Application Field And Working Principle

The AD8216WYRZ-R7 is a high-performance current-shunt monitor with a rail-to-rail output. This device monitors the voltage across a current shunt or a low-value sense resistor with a minimum sense voltage of 10mV. The high-side input consists of a low-impedance shunt and single power-supply operation can be achieved with a common voltage range of 2.7V to 5.5V.

The device allows a low-value sense resistor to be connected across the load, providing a sense voltage of 10mV at its 0A setting. This sense voltage is monitored and amplified by the AD8216WYRZ-R7 current-shunt monitor. The output of the device is a rail-to-rail voltage proportional to the current flowing through the load.

The AD8216WYRZ-R7 is ideal for industrial motor control, power system monitoring and other applications requiring accurate, low-cost current monitoring with a rail-to-rail output. The device maintains a low-output impedance, making the output more accurate over various temperature and supply conditions.

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

Instrumentation amplifiers, or IAs, are designed to amplify low-level signals in the presence of noise. IAs provide high accuracy, high gain, and high bandwidth while rejecting common-mode signals, allowing the desired signal to be amplified without interference from other signals. They are typically used in medical, scientific, and industrial applications.

Op amps are linear devices used to amplify or modify analog signals. The most common op-amps are single-supply, single-pole devices that provide high-gain, low-noise amplification for signals with a wide range of frequencies. These amplifiers are used in various applications including audio, motor control, power supply regulation, and signal conditioning.

Buffer amplifiers are simple electrical circuits that allow signals to be transmitted between two components without affecting the signal\'s amplitude or frequency. These amplifiers are useful in electronic systems where components must remain electrically isolated while providing accurate signal transmission. Buffer amplifiers are also used as voltage followers which help to reduce the load on an input signal by isolating it from the output load.

In addition to their uses in signal amplification, linear amplifiers are also used to regulate the flow of current and voltage in circuits. These amplifiers are used to reduce noise and create a stable current or voltage. Linear amplifiers are also used to provide isolation in order to avoid the possibility of electric shock from high-voltage systems.

The specific data is subject to PDF, and the above content is for reference