Allicdata Part #: | ADA4610-2ARMZ-RLTR-ND |
Manufacturer Part#: |
ADA4610-2ARMZ-RL |
Price: | $ 1.51 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Analog Devices Inc. |
Short Description: | IC OPAMP JFET 16.3MHZ RRO 8MSOP |
More Detail: | J-FET Amplifier 2 Circuit Rail-to-Rail 8-MSOP |
DataSheet: | ADA4610-2ARMZ-RL Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 1.37416 |
Current - Input Bias: | 5pA |
Base Part Number: | ADA4610 |
Supplier Device Package: | 8-MSOP |
Package / Case: | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) |
Mounting Type: | Surface Mount |
Operating Temperature: | -40°C ~ 125°C |
Voltage - Supply, Single/Dual (±): | ±4.5 V ~ 15 V |
Current - Output / Channel: | 79mA |
Current - Supply: | 1.6mA |
Voltage - Input Offset: | 400µV |
Series: | -- |
-3db Bandwidth: | 9.5MHz |
Gain Bandwidth Product: | 16.3MHz |
Slew Rate: | 61 V/µs |
Output Type: | Rail-to-Rail |
Number of Circuits: | 2 |
Amplifier Type: | J-FET |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The ADA4610-2ARMZ-RL is a type of linear amplifier primarily used in instrumentation, operational amplifiers, buffers, and other applications. The ADA4610-2ARMZ-RL provides a precision voltage feedback configuration and rail-to-rail single-ended amplifier. This amplifier is designed to have wide dynamic range and low output noise, with a low offset voltage. The ADA4610-2ARMZ-RL offers a wide power supply voltage range of 1.4V to 5.5V and a low power consumption for battery-operated applications. This amplifier also offers wide gain bandwidth product along with fast settling time. The amplifier is protected disabling the amplifier if the output voltage polarity is reversed or exceeds the maximum or minimum ratings. This helps to protect the amplifier from potential damage due to excessive over-voltage or short circuit conditions.
The ADA4610-2ARMZ-RL has a single-ended input, single-ended output, and internally set gain of 2. Stand-by mode is supported and the amplifier is enabled by activating two pins: a logic high enable pin and a logic low gain pin. The gain pin can be used to increase the gain to 10 when switching between two amplitude settings. This allows for better resolution and reduced noise in applications where high gain is required.
In a typical application, the ADA4610-2ARMZ-RL can be used as a buffer amplifier. Buffered amplifiers are used to reduce the input impedance of a load, which allows for greater signal integrity in high performance applications. The amplifier also provides an output impedance matching option for increased linearity across a wide frequency range. The ADA4610-2ARMZ-RL can also be used as an operational amplifier in low power applications. An operational amplifier is used to amplify a signal from a source, while maintaining the signal’s characteristics with minimum distortion. The ADA4610-2ARMZ-RL provides low noise with a maximum current capability of 10mA. This allows for increased signal-to-noise ratio in audio applications.
The ADA4610-2ARMZ-RL can also be used as a voltage converter. This allows the amplifier to convert voltage from one range to another, while maintaining the input signal characteristics. This is used in applications such as signal conditioning and filtering. The ADA4610-2ARMZ-RL also provides a high level of protection against over-voltage and over-current conditions.
In summary, the ADA4610-2ARMZ-RL is a linear amplifier used in instrumentation, operational amplifiers, buffers, and other applications. This amplifier provides precision voltage feedback configuration and rail-to-rail single-ended amplifier capability. It also has a wide power supply voltage range and supports stand-by mode. The ADA4610-2ARMZ-RL is often used as a buffer amplifier, an operational amplifier, and a voltage converter. This amplifier provides increased signal-to-noise ratio in audio applications, as well as protection against over-voltage and over-current conditions.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ADA4891-2ARM-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4891-2A... |
ADA4860-1YRJ-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4860-1Y... |
ADA4817-1ACP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4817-1A... |
ADA4891-1AR-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4891-1A... |
ADA4856-3YCP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4856-3Y... |
ADA4857-1ACP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4857-1A... |
ADA4851-2YRM-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4851-2Y... |
ADA4841-2YRM-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4841-2Y... |
ADA4853-1AKS-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4853-1A... |
ADA4891-2AR-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4891-2A... |
ADA4841-1YRJ-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4841-1Y... |
ADA4939-1YCP-EBZ | Analog Devic... | 0.0 $ | 950 | BOARD EVAL FOR ADA4939-1Y... |
ADA4938-1YCP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4938-1Y... |
ADA4938-2YCP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4938-2Y... |
ADA4939-2YCP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4939-2Y... |
ADA4937-1YCP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4937-1Y... |
ADA4941-1YR-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4941-1Y... |
ADA4937-2YCP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4937-2Y... |
ADA4932-1YCP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4932-1Y... |
ADA4932-2YCP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4932-2Y... |
ADA4898-2YRD-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4898-2Y... |
ADA4899-1YCP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4899-1Y... |
ADA4899-1YRD-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4899-1Y... |
ADA4927-1YCP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4927-1Y... |
ADA4922-1ARD-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4922-1A... |
ADA4930-2YCP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4930-2Y... |
ADA4927-2YCP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4927-2Y... |
ADA4930-1YCP-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4930-1Y... |
ADA4841-2YR-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4841-2Y... |
ADA4851-1YRJ-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVALUATION FOR ADA4... |
ADA4817-1ARD-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4817 SO... |
ADA4897-1AR-EBZ | Analog Devic... | 0.0 $ | 1000 | BOARD EVAL FOR ADA4897 SO... |
ADA4940-1ACP-EBZ | Analog Devic... | 0.0 $ | 1000 | EVAL BOARD DIFF OPAMP ADA... |
ADA4805-1AKSZ-EBZ | Analog Devic... | 0.0 $ | 1000 | EVAL BOARD FOR ADA4805-1S... |
ADA4805-1ARJZ-EBZ | Analog Devic... | 0.0 $ | 1000 | EVAL BOARD FOR ADA4805-1S... |
ADA4805-2ARMZ-EBZ | Analog Devic... | 0.0 $ | 1000 | EVAL BOARD DUAL OPAMP RRO... |
ADA4805-2ACPZ-EBZ | Analog Devic... | 0.0 $ | 1000 | EVAL BOARD FOR ADA480510-... |
ADA4807-1AKSZ-EBZ | Analog Devic... | 0.0 $ | 1000 | EVAL BOARD FOR ADA4807SC-... |
ADA4807-1ARJZ-EBZ | Analog Devic... | 0.0 $ | 1000 | EVAL BOARD FOR ADA4807SOT... |
ADA4938-2ACP-EBZ | Analog Devic... | 0.0 $ | 1000 | EVAL BOARD FOR ADA493824-... |
Ultra Precision Current Sense Amplifier ...
Operational Amplifiers - 4-Channel, 10MH...
IC OPAMP GP 600KHZ 8SOICGeneral Purpose ...
IC OPAMP VFB 150MHZ 8UMAXVoltage Feedbac...
IC OPAMP VFB 215MHZ SOT23-5Voltage Feedb...
IC OPAMP BUFFER 660MHZ 8SOICBuffer Ampli...