ADC1015S065HN/C1:5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADC) offer the ability to convert analog data into digital signals that can be manipulated by computers, microprocessors, and other control systems. The ADC1015S065HN/C1:5 is a type of ADC that offers a high resolution of up to 15 bit, and up to a 65MSamples/s (Mega Samples per second) sample rate. It is specifically designed for data acquisition and industrial applications that require high accuracy and fast conversion speed.

The ADC1015S065HN/C1:5 is a low voltage, single channel analog-to-digital converter that provides high performance and accuracy. It has a wide range of operation voltages and supports a sample rate of 65MSamples/s under 3.3 V, or 85MSample/s under 5 V. It is equipped with a synchronous serial port, enabling the transmission of data and commands at a high speed. The onboard FPGA processor and embedded software enable it to support up to 24 single-ended inputs and 48 differential inputs.

The ADC1015S065HN/C1:5 has numerous applications such as medical imaging, data acquisition, multi-channel precision instrumentation, industrial automation, motor control, and communications. It is also used for various analog data conversion tasks such as measuring temperature, pressure, current, and other analog signals. Additionally, the ADC1015S065HN/C1:5 can be used to measure the temperature and humidity for environmental monitoring.

The working principle of the ADC1015S065HN/C1:5 is based on the successive approximation register (SAR) technique. This technique allows for a quicker and more accurate conversion of analog data than other techniques. The ADC1015S065HN/C1:5 uses an SAR-based architecture to compare each analog sample with a digital reference, and then assigns the appropriate digital value to the analog data. This helps to reduce aliasing, reduce harmonic distortion, and increase the resolution of the digital data.

The ADC1015S065HN/C1:5 uses a conversion clock, actual clock input, sample start and clock output to control the conversion process. The clock input is used to measure the sampling time and to ensure that the sample being updated is accurate. The sample start signal starts the conversion clock, which sets the starting point of the conversion cycle. Finally, the clock output signals the completion of the conversion cycle.

The ADC1015S065HN/C1:5 also features power management features that help to reduce the power consumption of the device. It has low power consumption of 11 mW at 10 MSamples/s, and a comparator power consumption of 0.13 mW. The ADC device also features an automatic power-down mode that is activated when the device is idle for an extended period of time.

In summary, the ADC1015S065HN/C1:5 is a high resolution, fast conversion analog-to-digital converter that offers a wide range of applications and a SAR-based architecture for accurate analog data conversion. It is equipped with advanced power management features to reduce power consumption and increase performance.

The specific data is subject to PDF, and the above content is for reference