ADC12H034CIMSAX/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog to Digital Converters (ADC) are capable of converting analog signals into digital signals. The ADC12H034CIMSAX/NOPB is an ADC designed by Texas Instruments for cost-sensitive applications such as automotive and industrial applications. This device has a wide input range of 5V, with a sample rate of 3.6 MSPS. It also has a differential or single ended input, and can convert the input signal into 10 bit, 12 bit, or 16 bit code.

The ADC12H034CIMSAX/NOPB is considered a high-performance ADC, with a power consumption of only 1.3 mW. It is a low-noise device with a low input-referred noise of 150-microvolts peak-to-peak. It can also withstand a wide operating temperature range of -40°C to +105°C.

In terms of design capabilities, the ADC12H034CIMSAX/NOPB has a low power mode, which enables the device to power-down when the analog input signal is within a certain range. It also has an input-stage track-and-hold capability which eliminates the need for external track-and-hold components, reducing the total system cost. The device also has on-chip output-coding logic, which can configure output codes of 10-bit, 12 bit, or 16 bit.

In terms of application field, the ADC12H034CIMSAX/NOPB is mainly used in automotive and industrial applications which require high performance and reliability. The device has been specifically designed to meet the requirements of the Automotive Electronics Council (AEC-Q100) Grade 2 standard, making it suitable for automotive applications. The device also has a high temperature range, making it suitable for industrial applications.

The working principle of the ADC12H034CIMSAX/NOPB is based on Sigma-Delta Analog-to-Digital Conversion. This type of ADC uses a modulator, a low-pass filter, and a digital-to-analog converter, in order to convert an analog input signal into a digital signal. In the first step, the modulator converts the input signal into a stream of 1s and 0s based on the sampling rate. The second step is to pass this stream of 1s and 0s through a low-pass filter, which removes the high-frequency components from the analog signal. The final step is to convert this filtered signal into a digital signal by means of the digital-to-analog converter.

In conclusion, the ADC12H034CIMSAX/NOPB is a high-performance and cost-effective ADC which is mainly used in automotive and industrial applications. It has a high power efficiency, a wide input range, a low-noise device, and a wide operating temperature range. The device also has numerous design capabilities, making it suitable for cost-sensitive applications. It works on the principle of Sigma-Delta Analog-to-Digital Conversion, which uses a modulator, a low-pass filter, and a digital-to-analog converter to convert an analog input signal into a digital signal.

The specific data is subject to PDF, and the above content is for reference