ADC10D1500RB/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog to Digital Converters (ADCs) are devices used in electronic systems to convert analog signals into digital data, typically in the form of a binary number. They are used in a wide variety of applications, ranging from medical equipment and consumer electronics to automotive and industrial systems. The ADC10D1500RB/NOPB is a low-power 10-bit 1MSPS analog-to-digital converter designed to provide a high-resolution, low-power conversion solution for a variety of applications. This article will discuss the application field and working principle of ADC10D1500RB/NOPB.

Application field

The ADC10D1500RB/NOPB is suitable for a wide variety of applications such as medical imaging, industrial sensor systems, semiconductor test and measurement equipment, portable data acquisition, and automotive systems. The device is typically used in applications where a small form factor, low power consumption, and high-precision data conversion is required. It is also capable of dozing off power-hungry portions of the system when data conversion is not required, thus saving energy.

The ADC10D1500RB/NOPB is a 10-bit, 1MSPS analog-to-digital converter which offers features like high sampling speed, low power dissipation, and small form factor. It has a wide input voltage range from -0.3 V to VDD and a low input dynamic range of 94 dB (SNRFS of 92 dB). The ADC10D1500RB/NIOPB provides a peak performance of 1 MSPS at 5 MHz input, and its input capacitance of 9.5 pF helps to reduce filter sizing. The chip uses built-in power saving features to switch off power-hungry portions of the system while not actively converting analog inputs, thus generating power savings.

Working Principle

The ADC10D1500RB/NOPB utilizes a differential hybrid track-and-hold circuit to sample the input signal and convert it into a 10-bit digital code. It has an on-chip voltage reference and an on-chip sample-and-hold circuit to reduce component count and size in the target application. The ADC is able to sample at a maximum rate of 1MSPS, with an input sampling frequency up to 5MHz, thus providing a wide bandwidth for signal acquisition.

The on-chip sample and hold circuit is triggered by the input signal, and this triggers the differential hybrid track-and-hold circuit to acquire the sample and digitize it. The digital output is then passed to an on-chip logic block which performs calibration and creates an output code that is compatible with the supplied reference. Finally, the output data is output to the external digital bus. The operation of the ADC10D1500RB/NOPB is controlled by an on-chip register-based architecture that simplifies the interface of the device with external microcontrollers.

In summary, the ADC10D1500RB/NOPB is a low-power 10-bit 1MSPS analog-to-digital converter designed to provide a high-resolution conversion solution for a variety of applications. It utilizes a differential hybrid track-and-hold circuit to sample the input signal and convert it into a 10-bit digital code. The ADC10D1500RB/NOPB is suitable for a wide range of applications, and its on-chip power-saving features allow for more efficient data acquisition.

The specific data is subject to PDF, and the above content is for reference