ADC10DL065CIVS/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog to Digital Converters (ADC) are commonly used to convert analog signals into digital signals and it has wide range of applications. The ADC10DL065CIVS/NOPB, is a 10-bit, low-power device that performs monotonic conversions with dynamic on-chip calibration. This ADC is designed for use with low-cost, low-power applications that require good accuracy and minimum manufacturing calibration. ADC10DL065CIVS/NOPB is used in systems that require low cost, minimum operting current, accuracy, and dynamic response.

The ADC10DL065CIVS/NOPB allows for a wide dynamic range of conversion, operating from a single 2.7V to 3.6V supply. It is low-power, consuming 5?A/channel in normal operation, falling to as low as 2?A/channel in auto-scan mode. It supports high speed sample rates, reaching up to 2.25MHz with a 3V supply.

The ADC10DL065CIVS/NOPB features on-chip programmable gain amplifiers, which can amplify signals with gains of 6dB, 12dB and 24dB. It can perform differential or single-ended measurements, with a conversion time of up to 17.2?s.

The ADC10DL065CIVS/NOPB uses a wide variety of data acquistion techniques to adapt signals of different amplitude, frequency, and distortion into usable digital data. The device uses ramp-based successive approximation ADCs to measure absolute and differential signals. This type of ADC performs an individual operation on each sample, where the electrical charge of the analog signal is converted into a digital number. During each acquisition, the converter will determine the most significant bit and then issue the next bit.

The ADC10DL065CIVS/NOPB supports differential non-linearity (DNL) of 2LSB or better. Its clock jitter is typically 1ns. The differential linearity error is 0.25LSB over the entire frequency range. The device also features software-programmable offset and gain, which allows for calibration and adjustment to the analog circuit and avoids discrepancies in signal measurements.

The built-in self-calibration feature of the ADC10DL065CIVS/NOPB ensures accurate signal performance, significantly reducing the need for manual calibration. It also has an auto-zero feature to reduce the offset drift, allowing for accurate and “on-the-fly” compensation for stability in high temperature environments.

In conclusion, the ADC10DL065CIVS/NOPB is a low-power, accurate analog-to-digital converter that has a wide range of applications. It features high speed sample rates, integrated gain amplifiers and software-programmable offset and gain. Moreover, it provides low-power operation, good accuracy and dynamic response. As a result, ADC10DL065CIVS/NOPB is ideal for applications in data acquisition, medical and industrial instrumentation, medical and industrial automation and many other low-cost, low-power applications.

The specific data is subject to PDF, and the above content is for reference