ADC128S102CIMT/NOPB

Number of A/D Converters:	1
Base Part Number:	ADC128S102
Supplier Device Package:	16-TSSOP
Package / Case:	16-TSSOP (0.173", 4.40mm Width)
Operating Temperature:	-40°C ~ 105°C
Features:	--
Voltage - Supply, Digital:	2.7 V ~ 5.25 V
Voltage - Supply, Analog:	2.7 V ~ 5.25 V
Reference Type:	Supply
Architecture:	SAR
Series:	--
Ratio - S/H:ADC:	1:1
Configuration:	MUX-S/H-ADC
Data Interface:	SPI, DSP
Input Type:	Single Ended
Number of Inputs:	8
Sampling Rate (Per Second):	1M
Number of Bits:	12
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ADC128S102CIMT/NOPB is a data acquisition device designed to provide users with a simple method for converting analog signals into digital signals. It is a type of analog-to-digital converter (ADC) that provides both high-resolution (24-bits) and high-speed (2Msps maximum throughput) with very low-power operation (down to 60mW). This device is ideal for applications that require an analog-to-digital conversion without the large power requirements associated with other ADC devices.This device is built on National Semiconductor\'s advanced 24-bit Sigma-Delta Analog-to-Digital converter core and includes digital input logic to make the ADC easier to integrate into any system. The ADC128S102CIMT/NOPB is capable of converting analog signals with a frequency range of 3 MHz to 10 kHz while providing two-channel simultaneous sampling. As a low-power ADC, this device is suitable for battery-powered applications such as medical, automotive, and industrial systems.The ADC128S102CIMT/NOPB is designed for use in a variety of applications. It can be used for audio processing and recording, energy harvesting, medical instrumentation, and data acquisition systems. In medical applications, it can be used to convert cardiac, EEG, and ECG signals. In energy harvesting, it can be used to monitor and measure the performance of energy storage or generating systems. In automotive applications, it can be used for engine control, powertrain monitoring, and digital fuel injection, as well as audio systems. Industrial applications range from measuring process control parameters and condition monitoring to precision measurement and process control.The ADC128S102CIMT/NOPB is a single-supply, 24-bit sigma-delta analog-to-digital converter with a differential, thermocouple-input range that operates on a 5.0V nominal supply and can tolerate an absolute maximum supply of 6.0V. It offers an analog data-input range from ±2.5V differential or ±4.096V single differential. The single-ended input range is 0V-4.096V. The device features two differential analog inputs, two analog outputs, and two digital outputs.The ADC128S102CIMT/NOPB includes an onboard 12-bit digital-to-analog converter (DAC) that is factory trimmed. The DAC is used to generate reference voltages, provide a reference voltage to the ADC inputs, and provide a bipolar 0V to 4V output range. The device also features an onboard analog-gain amplifier with a gain range of 1-256. The internal precision resistors and capacitors minimize gain drift, reduce noise, and optimize performance. The onboard digital interface enables users to interface to different digital systems. This device is designed for communication with an I²C digital interface and has an integrated clock and digital logic for synchronous data acquisition. The on-board logic allows for 8-bit or 16-bit data words to be used for each conversion. The device has a maximum throughput rate of 2 M samples per second or 4 M samples per second in double-byte operation mode.The serial interface of the ADC128S102CIMT/NOPB supports standard I2C and SPI commands for both input data and configuration registers. Data can be read from the on-board logic using an I2C/SPI read command. The device also has a built-in test and calibration microcontroller to ensure performance and accuracy. The microcontroller supports advanced features such as sweep and hold modes, offset calibration, and gain calibration.The ADC128S102CIMT/NOPB is well suited to applications requiring low-power, low-cost, and high-resolution data acquisition. It offers a high speed of 2Msps throughput alongside low-power operation down to 60mW. The on-board logic and digital interface enable easy integration into existing systems. The built-in DAC and analog-gain amplifier simplify signal conditioning, allowing for easy and efficient operation. The device is suitable for a wide range of industrial and medical applications including energy harvesting, data acquisition, audio processing, medical instrumentation, and process control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description