ADC16DX370RMET

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADC16DX370RMET is a high performance 16-bit delta-sigma (ΔΣ) analog-to-digital converter (ADC) with integrated voltage reference, available in a 14-lead TSSOP or in a 16-lead VQFN package. This device is ideally suited for applications requiring a very wide dynamic range, with a High-Accuracy 0.5 ppm Integrated Voltage Reference. It also contains an on-chip oscillator, an internal voltage reference, a sample-and-hold circuit, 16-bit DAC, analog input buffer, and a clock.

ADC16DX370RMET is an example of a high-precision ADC that is suitable for data acquisition from single or multiple analog input channels. It can sample multiple analog inputs over a wide range of frequencies and resolutions. Its wide dynamic range and high accuracy make it suitable for applications in various fields such as medical, automotive, and industrial. It can be used to measure temperature, pressure, strain, and other physical properties, as well as to digitize audio, video, and communications signals.

The working principle of the ADC16DX370RMET is based on delta-sigma conversion. Delta-sigma conversion is a method of converting an analog input signal into a digital output by sampling the analog signal at regular intervals, and then applying a mathematical algorithm to compute the accuracy of the digital output. The algorithm converts the sampled analog input voltage into a digital output, by mapping each bit of the output to a specific voltage range determined by the reference voltage used as a reference in the conversion. The reference voltage is also used to limit the range of the digital output.

The ADC16DX370RMET converter uses a 16-bit Delta-Sigma architecture with PGA (Programmable Gain Amplifier) to convert the input signal at a high precision of 0.5 ppm. The high accuracy of the conversion is achieved by averaging over a large number of samples at a rate of up to 126 Ksps. Averaging is employed to reduce the impact of noise on the output signal and to improve the resolution of the output.

The ADC16DX370RMET also has an integrated voltage reference, which is used to provide the reference voltage against which the input signal is compared. This reference voltage can be either an external voltage source or an internal voltage reference. The internal voltage reference is a tightly regulated voltage, which is set and maintained by the manufacturer to maintain the accuracy of the converter. The PGA allows for gain setting of the converter, ranging from 0dB to 6dB, which provides a wide range of input sensitivity.

The ADC16DX370RMET is programmable through the SPI (Serial Peripheral Interface) interface, which allows the user to configure the device’s various parameters such as sampling frequency, gain setting and output resolution. The setup is done by writing the appropriate commands and data to the SPI register. The SPI interface also provides registers for controlling the device’s interrupt and power-down mode.

In summary, the ADC16DX370RMET is an example of a high performance, 16-bit Delta-Sigma Analog-to-Digital Converter with very wide dynamic range, high precision and accuracy and integrated voltage reference. It is suitable for data acquisition from single or multiple analog input channels and is ideal for applications requiring a very wide dynamic range. It is programmable through SPI and is available in a 14-lead TSSOP or 16-lead VQFN package.

The specific data is subject to PDF, and the above content is for reference