ADG1419BCPZ-REEL7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ADG1419BCPZ-REEL7 can be classified as an analog switch, multiplexer, or demultiplexer. The device is a 4-Channel Switch featuring an Enable Pin, which can be used to control the flow of signals throughout the system. Additionally, the device features a 5th pin which is capable of acting as an inverted version of the Enable Pin. The device is capable of operating in single-supply or dual-supply applications, with a rail-to-rail input and output voltage range of up to 15V.

Analog switches are devices which are used to connect and bridge two nodes of a signal path, essentially enabling signals to flow from one point to another. These switches are capable of routing and controlling the flow of analog signals within a system. The ADG1419BCPZ-REEL7 switches are controlled by various logic levels – when a logic high is applied to the Enable Pin, the switch will open, and when a logic low is applied, the switch will close. The Enable Pin can be used to enable or disable multiple switches simultaneously, allowing for control over the entire system.

Multiplexers are devices which allow the selection of one of many possible signal inputs, to be connect to a single output. This allows for several signals to be transmitted over a single line. The ADG1419BCPZ-REEL7 Multiplexer is a 4:1 multiplexer, meaning it is capable of connecting four signal inputs to a single output, while being controlled by two logic signals. The multiplexer is capable of selecting any of the four inputs when enabled, and a complementary inverted input when the Enable Pin is in a logic low state.

Demultiplexers are the exact opposite of multiplexers – they take a single input signal and are capable of distributing it to various outputs. The ADG1419BCPZ-REEL7 is a 4:1 demultiplexer, meaning it is capable of taking in a single input signal, and routing it to any of the four available outputs, depending on the status of the Enable Pin. When the Enable signal is in a logic high state, the demultiplexer will route the signal to the corresponding output, while when in a logic low state, the signal is routed to the complementary inverted output.

In summary, the ADG1419BCPZ-REEL7 is capable of performing both analog switching and multiplexing/demultiplexing applications. It offers a rail-to-rail input and output voltage range of up to 15V, and can be used in both single-supply and dual-supply applications. Due to its ability to be controlled by various logic levels, it can be used to control various switches or multiplexers/demultiplexers throughout a system.

The specific data is subject to PDF, and the above content is for reference