ADG633YCPZ-REEL7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADG633YCPZ-REEL7 is a low-power 3-channel, single pole double throw (SPDT) bus switch designed for analog signal applications. It is an integrated part of an Analog Switches, Multiplexers, Demultiplexers family of products. The ADG633YCPZ-REEL7 is a multiplexer, a device that switches signals from multiple inputs to one output. This switch has three independent inputs and one common output that is multiplexed between the inputs. The ADG633YCPZ-REEL7 switch has been designed with both logic level control and analog control inputs allowing it to be used in both digital and analog application. It has low insertion loss of 0.25 dB and fast switching times of 5ns.

The operating voltage range is 2.7V to 5.5V and the supply current is 55uA maximum. The ADG633YCPZ-REEL7 also supports a wide range of temperature from -40°C to +85°C. It is suitable for a variety of digital and analog audio/signal applications such as amplifiers, modems, circuit switching, multiplexers and demultiplexers.

The ADG633YCPZ-REEL7 is connected to two digital input control pins (S1 and S2). These poles can be used to select one of the three analog input signals. The digital input logic voltage range is 0V to VDD, and logic HIGH is VDD. A logic LOW level on one of these input pins (S1 or S2) will result in an output that is high impedance. The logic inputs are asynchronous and can handle up to 10KHz.

The ADG633YCPZ-REEL7 is also connected to an analog select pin (FS). The analog select pin is used to select between the three analog input signals. The analog signal input range is 0V to VDD and the control range is 0V to (VDD-2V). The analog selector is put between the logic and the switching transistor. This allows the analog frequency input to be properly adjusted for the external devices, making it easier and faster to read the data.

The ADG633YCPZ-REEL7 supports two power down modes. One is static power down mode and the other is a dynamic power down mode. In static mode, the switch is disabled because of an open collector output and the logic inputs are then disabled. In dynamic mode, the logic inputs remain enabled, but the switch is disabled. The dynamic mode also allows for faster switching times and a lower power consumption.

In conclusion, the ADG633YCPZ-REEL7 is an ideal solution for switching multiplexed analogue signals. Its low power consumption, fast switching times and low distortion makes it ideal for audio, signal and circuit switching applications. Its wide temperature range and wide voltage range make it suitable for a variety of conditions and can be used in both digital and analogue applications. The addition of two power down modes allows it to be used in a wide range of applications. It is the perfect choice for multiplexing and demultiplexing analogue signals.

The specific data is subject to PDF, and the above content is for reference