ADG712BR

Switch Time (Ton, Toff) (Max):	11ns, 6ns (Typ)
Base Part Number:	ADG712
Supplier Device Package:	16-SOIC
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Operating Temperature:	-40°C ~ 85°C (TA)
Crosstalk:	-90dB @ 10MHz
Current - Leakage (IS(off)) (Max):	100pA
Channel Capacitance (CS(off), CD(off)):	10pF, 10pF
Charge Injection:	3pC
-3db Bandwidth:	200MHz
Series:	--
Voltage - Supply, Dual (V±):	--
Voltage - Supply, Single (V+):	1.8 V ~ 5.5 V
Channel-to-Channel Matching (ΔRon):	--
On-State Resistance (Max):	4 Ohm
Number of Circuits:	4
Multiplexer/Demultiplexer Circuit:	1:1
Switch Circuit:	SPST - NO
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface - Analog Switches, Multiplexers, Demultiplexers: ADG712BR

Analog switches, multiplexers and demultiplexers are three types of interface components that are used to switch analog signals between various path of communication. Among these, the ADG712BR component from Analog Device is a monolithic CMOS analog multiplexer that allows signals to be switched between two separate paths.

Application Field

Because of its versatility, the ADG712BR CMOS multiplexer can be used in many different applications. It can be used to switch between multiple analog signals in a variety of applications, such as medical imaging, communication systems, and test and measurement equipment. It is also used in power management and instrumentation systems, as the device can switch high input signals with low power consumption. Additionally, the ADG712BR can be used in a wide range of applications that require high levels of accuracy and reliability.

Working Principle

The ADG712BR device is a monolithic CMOS analog multiplexer that has two separate paths of signals. The multiplexing path is used for switching, and the demultiplexing path is used for receiving signals. The multiplexing path contains two differential signals, In1 and In2, which are connected to the input of the device. The demultiplexing path is connected to the output, with the Out1 and Out2 signals being sent to the output of the device.In order to switch between these two paths, the select pin is used. When the select pin is not activated, the In1 signal is sent through Out1, while the In2 signal is sent through Out2. When the select pin is activated, the In1 signal is sent to Out2, while the In2 signal is sent to Out1.The device can also be operated in a 3-state. In this mode, the select pin is held low and the outputs become inactive, allowing for a high-impedance condition. The ADG712BR also has a power-on reset mechanism that prevents both pins from being active at the same time. This ensures that the device works reliably and keeps the output from being affected by input signals.

Conclusion

The ADG712BR from Analog Device is a monolithic CMOS analog multiplexer that allows for switching between two separate paths of signals. It can be used in a variety of applications, such as medical imaging, communication systems, and test and measurement equipment. It also offers low power consumption, high levels of accuracy, and reliable operation. With its versatility and reliability, the ADG712BR is an exceptional device for switching analog signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description