ADL5902ACPZ-R7 RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Detectors:

The ADL5902ACPZ-R7 is a small yet sophisticated detector circuit that operates within the RF (radio frequency) spectrum. It is ideal for applications such as base station receivers, high gain amplifier protection, antenna noise coupling, and general switching. The ADL5902ACPZ-R7 combines both high gain and high linearity in one device, making it an extremely versatile component for a variety of radio frequency applications.

Application Field:

The ADL5902ACPZ-R7 is suitable for applications such as base station receivers, high gain amplifier protection, antenna noise coupling, and general switching. It is primarily intended for use in radio frequency systems that operate within the 20MHz to 6GHz frequency range. The device can also be used for power measurement and modulation monitoring in base station receivers.

In addition to its use in base station receivers, the ADL5902ACPZ-R7 can also be used in antenna noise coupling circuits. This is due to its high linearity, which allows it to accurately measure signal power before being further processed. The device is also capable of providing protection against overloads in high gain amplifiers.

The ADL5902ACPZ-R7 is also suitable for general switching applications. Due to its high linearity, it can be used to switch signals accurately and quickly without introducing any distortion or errors. It can also be used to monitor modulation levels in radio frequency systems.

Working Principle:

The ADL5902ACPZ-R7 is a one to one detector circuit that works on the principle of detecting signals in the RF spectrum. The device utilizes two Schottky diode chains, which are connected in parallel across a single input. When a signal is detected by the device, the two diode current chains cause a drop in the voltage across the bias voltage resistor. This voltage drop is then measured by the output arm of the circuit.

The output arm, which contains a voltage multiplier circuit, is used to measure the peak voltage of the detected signal. Depending on the magnitude of the detected signal, the voltage multiplier circuit can generate a voltage up to 17.5V. Additionally, the voltage multiplier circuit is also used to generate the AFC voltage for the device.

The voltage multiplier circuit also contains a low-noise preamplifier, which is used to amplify weak signals before they are fed to the output arm. This low-noise preamplifier is necessary for high gain systems where weak signals need to be amplified before further processing. Once the signal has been detected and amplified, it is then fed to the detector output port.

The ADL5902ACPZ-R7 is capable of detecting signals up to 6GHz and has a maximum input voltage of 15V. The device is also capable of operating in extreme temperatures ranging from -40°C to +85°C and contains reverse polarity protection on the input lugs, ensuring that the device will continue to function even if reverse polarity is inadvertently applied to the input. Additionally, the ADL5902ACPZ-R7 has a very low power dissipation of only 500mW, making it an ideal choice for applications that require low power operation.

The specific data is subject to PDF, and the above content is for reference