ADM1088AKS-REEL7

Series:	Simple Sequencers®
Packaging:	Cut Tape (CT)
Part Status:	Obsolete
Type:	Sequencer
Number of Voltages Monitored:	1
Output:	Push-Pull, Totem Pole
Reset:	Active Low
Reset Timeout:	Adjustable/Selectable
Voltage - Threshold:	Adjustable/Selectable
Operating Temperature:	-40°C ~ 125°C (TA)
Mounting Type:	Surface Mount
Package / Case:	6-TSSOP, SC-88, SOT-363
Supplier Device Package:	SC-70-6
Base Part Number:	ADM1088

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to ADM1088AKS-REEL7

The ADM1088AKS-REEL7 is a PMIC - Supervisors device produced by Analog Devices. Its purpose is to protect electronic systems from a wide range of over-voltage, over-current and over-temperature events. The device is designed to allow flexibility for system engineers to implement various applications that require over-voltage, over-current and overtemperature protection, such as battery powered and industrial applications. The ADM1088AKS-REEL7 is a single channel supervisor for voltage, current and temperature.

Application Field of ADM1088AKS-REEL7

The ADM1088AKS-REEL7 is designed for applications where over-voltage, over-current and over-temperature protection are of the utmost importance. The device can be used in a variety of systems, including industrial, motor control, battery powered systems, consumer electronics, communications, medical, military and aerospace applications. Its features include latching, adjustable trip and reset points, scalable timer, single open drain reset output, hysteresis, an integrated short circuit protection, system event logging and an adjustable current limit. The features of the ADM1088AKS-REEL7 makes it ideal for applications involving high voltage, high current and high temperature.

Working Principle of ADM1088AKS-REEL7

The ADM1088AKS-REEL7 works on the principle of setting a threshold value and operating point for each type of protection. The device monitors the system for any deviations from accepted thresholds. If the thresholds are exceeded, the device triggers an over-voltage, over-current or over-temperature protection event. The device also uses a timer to ensure that a current is only allowed to exceed the threshold for a limited amount of time, thus preventing permanent damage to the system. When an over-voltage, over-current or over-temperature protection event occurs, the device will either latching or non-latching operation depending on the settings.

Overview of Features

The ADM1088AKS-REEL7 incorporates a number of features to ensure that the device and associated system is not affected by any over-voltage, over-current or over-temperature events. These features include latching, adjustable trip and reset points, scalable timer, single open drain reset output, hysteresis, an integrated short circuit protection, a system event logging and an adjustable current limit. The latching feature allows the device to detect and latch an over-voltage, over-current or over-temperature event, preventing any further damage or problems from occurring. The adjustable trip and reset points allows user to adjust the threshold to suit the application.The scalable timer, integrated with the adjustable trip and reset points, allows the user to set a limited amount of time during which a current is allowed to exceed the threshold set. This can help to prevent any permanent damage to the system. The single open drain reset output allows the device to reset the system in case of an over-voltage, over-current or over-temperature event. The hysteresis feature provides the device with an additional level of protection and helps to reduce power consumption. Finally, the adjustable current limit allows user to limit the total amount of current that can pass through the device.

Conclusion

The ADM1088AKS-REEL7 is an invaluable PMIC-Supervisors device from Analog Devices. It is designed for applications where over-voltage, over-current and over-temperature protection are of the utmost importance. The device incorporates numerous features which allow user to switch or latch an over-voltage, over-current or over-temperature event, allowing the user to take proactive steps to protect the system. The features and capabilities of the device make it invaluable in systems where accuracy, precision and reliability are of the utmost importance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description