ADS1224IPWT

Number of A/D Converters:	1
Base Part Number:	ADS1224
Supplier Device Package:	20-TSSOP
Package / Case:	20-TSSOP (0.173", 4.40mm Width)
Operating Temperature:	-40°C ~ 85°C
Features:	Temperature Sensor
Voltage - Supply, Digital:	2.7 V ~ 5.5 V
Voltage - Supply, Analog:	2.7 V ~ 5.5 V
Reference Type:	External
Architecture:	Sigma-Delta
Series:	--
Ratio - S/H:ADC:	--
Configuration:	MUX-ADC
Data Interface:	SPI
Input Type:	Differential, Single Ended
Number of Inputs:	2
Sampling Rate (Per Second):	240
Number of Bits:	24
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADC)

An Analog to Digital Converter (ADC) is a device or electronic circuit that is used to convert an analog input signal into a digital signal or output. ADC’s are commonly used in a variety of industrial, automotive, and consumer applications to capture and report analog signals into a digital format that can be analyzed, processed, and stored. One example of an ADC is the ADS1224IPWT.The ADS1224IPWT is a low-power, 24-bit, simultaneous sampling analog-to-digital converter (ADC) designed to acquire and convert signals in the commercial and industrial temperature range. This device integrates a voltage reference, clock oscillator, sampling system, track-and-hold amplifier, modulator and multiplexers, low-power signal path, digital signal processor (DSP), and digital output components. It is available in a 28-pin TSSOP and a 28-pin SOIC package and supports a wide range of input data rates and sampling configurations.The primary application fields of the ADS1224IPWT include industrial process control such as motors, pumps, and compressors, automotive engine and transmission systems, robotic control, and radio-frequency (RF) systems. The device is suitable for operation with single or multiple analog input signals and is optimized for industrial process control applications where operation in a wide range of temperature can be expected. It also offers low power consumption and fast conversion times with a sampling accuracy of 24-bit. The ADS1224IPWT also features integrated on-board Reference Voltage Generator (RVG) for precision reference and connecting with an external 20mA current source for current loop applications. The on-board VG and DSP allow the user to select between Pulse-Width Modulation (PWM) triggering or sampling of the input signals. The device is powered by an input voltage of 1.7V to 3.6V, allowing operation at low supply currents.The working principle of the ADS1224IPWT is based on the concept of digital signal processing. It uses a high-precision digital signal processor to accurately convert analog input signals into digital data. The ADC uses 3 different stages of signal processing: sampling, conversion, and output.In the first stage (sampling), the samples of the analog input signals are taken and stored in an internal memory. These are then sent to the ADC’s digital signal processor (DSP) for conversion into digital data. The DSP first converts the analog samples into a digital form, then applies filters and gains to the data for accurate representation. In the second stage (conversion), the DSP uses the data stored in the internal memory to calculate the voltages, currents, and frequencies of the analog signals. It then applies a low-noise filter to reduce noise and interference from the environment and other components. Finally, it performs the analog-to-digital conversion and sends the data to the Digital Output (DO) interface for further processing. In the last stage (output), the data is sent from the DO interface to the external system for further analysis and storage. The data is then analyzed, compared to the reference value, and processed to generate the corresponding digital output. This output can then be used to control and monitor the industrial processes or devices that rely on digital signals.The ADS1224IPWT is a versatile and precision Analog-to-Digital Converter designed for use in industrial, automotive, and consumer applications. It features a low-power, simultaneous sampling ADC with a sampling accuracy of 24-bit and is suitable for wide temperature range operation. It is designed to acquire and convert analog signals into a digital format and is fully customizable to meet the application requirements. Its integrated VG, DSP, and DO interface make it a powerful and cost-effective solution for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description