ADUM140D0BRWZ-RL

Common Mode Transient Immunity (Min):	75kV/µs
Base Part Number:	ADUM140
Supplier Device Package:	16-SOIC
Package / Case:	16-SOIC (0.295", 7.50mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply:	1.7 V ~ 5.5 V
Rise / Fall Time (Typ):	2.5ns, 2.5ns
Pulse Width Distortion (Max):	3ns
Propagation Delay tpLH / tpHL (Max):	13ns, 13ns
Data Rate:	150Mbps
Series:	iCoupler®
Voltage - Isolation:	3750Vrms
Channel Type:	Unidirectional
Inputs - Side 1/Side 2:	4/0
Number of Channels:	4
Isolated Power:	No
Type:	General Purpose
Technology:	Magnetic Coupling
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital Isolators are devices used to electrically isolate one part of an electrical circuit from another. They create a barrier between parts of a system that are electrically noisy, optically noisy, or both, allowing communication at a lower voltage level than would otherwise be possible, while maintaining galvanic isolation to prevent electricity from ingressing from one part of an electrical system to another. Implemented in a wide range of applications, digital isolators operate by processing electrical signals to provide signal transmission in order to reduce the amount of noise and interference picked up in the process. Such devices are popular in a variety of industrial, commercial, and residential applications.The ADUM140D0BRWZ-RL digital isolator is a single-channel device designed to interface between two logic systems across a variety of applications. This isolator has two separate logic circuits; a transmitter circuit and a receiver circuit. The transmitter is the side of the digital isolator that receives digital signals from its source, and transmits them as a voltage level across a dielectric gap. The receiver then decodes the received signal into a logic level suitable for its destination.The encoder inside the ADUM140D0BRWZ-RL isolator allows for digital signals voltage conversions to be conducted at a low voltage level. This makes this isolator suitable for communication with low voltage digital signal sources, such as data converters, microcontrollers and logic gates. The signal received is then converted into a level appropriate for the downstream logic system. Conversion is completed in under 0.2 µs, providing fast response rates needed for modern communications.The ADUM140D0BRWZ-RL isolator is designed for minimal power consumption, with operating current as low as 5 mA. Additionally, this isolator offers > 500 Vrms galvanic isolation with a highly reliable dielectric gap, reducing the risk of interference between signal and ground planes. The lower than normal turn-on and turn-off time ensures that high-speed data transmissions are correctly handled, providing accurate performance in fast time-critical applications.The ADUM140D0BRWZ-RL digital isolator is a suitable solution for a wide range of industrial, commercial, and residential applications. It is ideal for use in medical electronics, automotive electronics, factory automation, industrial process control, network communications, and home automation. Its ability to convert low voltage digital signals between two different logic systems also makes it suitable for use in portable and low voltage digital applications.Whether the device is used in a factory automation system, a telecommunications application, or an industrial process control system, the ADUM140D0BRWZ-RL isolator provides reliable signal conversion at high speed, with minimal power consumption, and high levels of isolation. The device is also easy to install and configure, and provides an effective and inexpensive way to isolate and reduce noise in a variety of electrical systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description