Series:	AEDB-9340
Part Status:	Active
Encoder Type:	Optical
Output Type:	Quadrature with Index (Incremental)
Pulses per Revolution:	2500
Voltage - Supply:	5V
Actuator Type:	8mm Open Center
Detent:	No
Built in Switch:	No
Mounting Type:	Chassis Mount, Motors
Orientation:	--
Termination Style:	Terminal Pins
Rotational Life (Cycles Min):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders

AEDB-9340-W13A Application Field and Working Principle

An encoder is a device used to transfer an analog or digital signal into a form that can be read by a computer. In the electronic world, an encoder is used to create a digital signal from an analog or digital input signal. This digital signal can be used to control the digital motion of motors or other motion control devices. AEDB-9340-W13A is one such type of encoder device which is manufactured by Crevo Corporation and is used to handle the digital signals from mechanical motion.The AEDB-9340-W13A is an incremental optical rotary encoder. It is a pulse device which used an optical sensing head to sense the rotation of a circular target, typically a wheel or an encoder disc. The sensing head would follow along with the rotation of the target and send out electrical pulses. These pulses produced by the sensor will create the digital output signal for the AEDB-9340-W13A.The AEDB-9340-W13A is widely used in many industries and applications. It can be used for position, velocity, and distance measurement. It is commonly used to measure the rotation of wheel, motor, actuator, and encoder disc. It is also widely used to monitor the speed and position of conveyor belts, robots, printing machines, turbines, and medical instruments.The working principle of the AEDB-9340-W13A is relatively simple. When the encoder is energized, a light source will emit light and is reflected back by a target, usually an encoder disc or a wheel on a shaft. This reflected light is collected by an opto-electronic sensing chip which measures the amount of light compared to the pre-set level and then sends out electrical pulses accordingly.This electrical signal pulses out from the AEDB-9340-W13A encoder indicates the movement of the encoder disc or wheel. The frequency of these pulses indicates the rate of rotation and the position of the encoder disc can be determined by counting the number of pulses. By using pre-set alarms, the speed of the rotation can be monitored and controlled.In conclusion, the AEDB-9340-W13A is an optical rotary encoder and it is widely used in motion control industry. It has a relatively simple working principle, which is to emit light reflected back by an encoder disc or wheel and convert it into electrical pulses accordingly. By monitoring the frequency of these pulses, users can determine the speed and position of the encoder disc. And with the proper setting of the alarm, users can easily control the speed of the rotary encoder.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description