AEDL-5810-J06

AEDL-5810-J06 is an encoder designed for different types of applications and working principles. It is an angular transducer with a voltage output which is useful for applications involving angular position measurement or angular speed measurement. The AEDL-5810-J06 encoder is suitable for relay type or drives with linear or rotary motion response. It is made with a solid state design, which offers high sensitivity and resolution.

The AEDL-5810-J06 encoder is designed to have a low component count and its operating voltage is multivoltage regulator compatible. Its signal range is based on the mechanical range of the encoder. It has a linearity of less than 0.1% and it has a very high accuracy of up to 0.1°. The encoder can also be used as a linear or angular position encoder and its maximum output voltage is 5V, making it suitable for a variety of applications.

The AEDL-5810-J06 encoder is a Hall effect type sensor with two integrated Hall devices. The integrated Hall devices are approximately 1.5 mm in size and they can sense the magnetic field strength at various angles. The Hall device also sends out a voltage signal which is proportional to the field strengh sensed. This voltage signal is sent to the encoder and the encoder processes the signal and converts it into either an angular position signal or an angular speed signal.

When an encoder is used to measure angular position, the Hall device is used to sense the field strength of a magnet over a certain range and send the signal to the encoder. The encoder then processes this signal and converts it into a voltage signal which is proportional to the angular position of the magnet or any other external object. This signal can then be used by the external device to determine the position. In this case, the AEDL-5810-J06 encoder offers a resolution of 0.07° and a linearity of 0.1%.

When an encoder is used to measure angular speed, the Hall device is used to sense the field strength of a magnet as it rotates and send the signal to the encoder. The encoder then processes this signal and converts it into a voltage signal which is proportional to the angular speed of the magnet or any other external object. This signal can then be used by the external device to determine the speed. The AEDL-5810-M06 encoder can measure angular speed up to 45 RPM with a resolution of 0.01rpm.

Overall, the AEDL-5810-J06 encoder is an excellent solution for applications that require high accuracy and resolution. It is suitable for both position and speed sensing applications and is known for its consistent reliability and accuracy. The integrated Hall devices and low component count make it a reliable solution for a variety of applications.