AFE5808ZCF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog Front End (AFE) refers to the components within a device system that are responsible for monitoring, measuring, and converting the external physical parameters into an equivalent digital signal. It mainly acts as a bridge between a digital system and the analog world. The AFE5808ZCF is a low-power, low-voltage single-supply operational amplifier designed for a wide range of applications. It offers a high precision, low-noise performance, making it an ideal choice for signal conditioning and other signal processing requirements.

The AFE5808ZCF consists of three main components: an input amplifier, a buffer and an output amplifier. The amplifier provides a high-impedance signal input and offers a typical gain of 20V/V. The buffer works as an isolation amplifier, providing isolation from the input voltage. The output amplifier drives the signal to the next signal processing circuit.

The AFE5808ZCF is suitable for use in a wide range of applications such as signal conditioning, amplification, and signal shaping. It is ideally used for sensing applications that require high accuracy and output sensitivity, such as thermocouples, strain gauges, pressures sensors, and other bridge-providing transducers.

The main features of the AFE5808ZCF include a voltage range of ±10V, unity gain bandwidth of 640kHz, a slew rate of 240V/µs, maximum input offset voltage of 1.5mV, quiescent current of 4mA, low input bias current of 1nA, and high common-mode rejection ratio (CMRR) of 132dB. The small size and low power consumption of the AFE5808ZCF make it ideal for battery-powered applications. It also has a temperature drift of 10ppm/°C.

The AFE5808ZCF is designed to operate on a single supply of 3V to 5.25V. It can deliver a high-performance signal across the range of these supply levels, even when operating in a noisy environment. The user can adjust the gain of the AFE5808ZCF by changing the external capacitors or the resistor values on the buffer stage.

The output voltage stability of the AFE5808ZCF is maintained at a very low level by its adjustable output common-mode voltage regulator. The output common-mode voltage regulator is adjustable from -10V to +10V. This allows the user to set the output voltage of the AFE5808ZCF according to their requirements.

The AFE5808ZCF also comes equipped with an integrated amplifier that is optimized for any signal-processing application, providing high precision and low-noise performance. The integrated amplifier consists of five active stages that provide unity-gain buffer, differential amplifier, summing, and output buffer stages.

The robustness of the AFE5808ZCF makes it an ideal choice for signal conditioning, signal shaping, and signal conversion. Its small package size and low power consumption make it suitable for battery-powered applications. In addition, the adjustable output common-mode voltage regulator allows the user to configure the system according to their specific signal-processing requirements. Its high performance and low-noise characteristics make it a great choice for signal-conditioning applications.

The specific data is subject to PDF, and the above content is for reference