AHN12224

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AHN12224 is a power relay that can handle current values of more than 2 Amps in a variety of applications. It is a low current relay designed with a single-pole, double-throw (SPDT) contact configuration, meaning it has two sets of contacts which can be operated independently. It is capable of switching low current signals, including those within the range of 0.1 to 2 Amps.

This relay is suitable for use in many different applications, ranging from controlling electric motors, controlling HVAC systems, and controlling lights or sound systems. It can also be used to protect sensitive electronic equipment such as computers, cell phones, and digital cameras from power spikes or surges. By connecting relays to the load, a system can be configured to turn off or reduce power to that device when the current reaches a hazardous level.

The working principle of the AHN12224 relay is based on an electric current passing through the contacts. When the current exceeds the predetermined threshold, the contacts will open and close, depending on the circuitry of the relay. At the same time, the coil will be energized to allow the relay to remain opened or closed for a predetermined amount of time. This time is determined by the resistance of the coil. Once the current drops below the threshold, the relay will reset and the contacts will be opened.

AHN12224 uses a specially designed contact mechanism that allows for reliable and efficient performance. The mechanism consists of two sets of contact pads: an electromagnetically operated active set and a normally closed auxiliary set. When the current passes through the active set, the electromagnet will be activated and cause the contact to close. At the same time, the normally closed auxiliary set will open to prevent current from passing through it. This ensures that the relay remains opened even after the current passes through it abruptly.

Care must be taken when designing systems that use AHN12224. Proper contact gap and amp ratings should be determined, as the contact gap affects the performance of the relay. Additionally, the maximum amp rating should be set to ensure that a system is never overstressed or damaged.

In conclusion, the AHN12224 relay is a low current relay designed for applications that require reliable control over current values of more than 2 Amps. It features reliable and efficient performance, with a specially designed contact mechanism that prevents current surges from exceeding predetermined thresholds. It is important to ensure that proper contact gap and amp ratings are established to ensure the safety of the system. With these considerations, the AHN12224 can be a cost-effective and reliable solution for many different applications.

The specific data is subject to PDF, and the above content is for reference