AK10-170C Circuit Protection

AK10-170C is a type of Transient Voltage Suppression (TVS) diode with unidirectional characteristics. It offers protection against both positive and negative transients, as well as common mode surges. As such, it is an ideal solution for protecting sensitive electronic equipment from both isolated and harmonic disturbances which may arise due to lightning events, power line transients, or electrostatic discharge (ESD).

The AK10-170C is a diode with a peak reverse stand-off voltage of 170V. This voltage is the voltage at which the diode will begin to conduct current, and can effectively protect the electronics from transients or spikes higher than this defined voltage. The maximum surge current rating of the AK10-170C is 10A, with peak pulse power rating of 420W. This makes the device suitable for both low and high-voltage applications, where efficient protection from transient voltage is required.

The AK10-170C is suitable for a variety of applications, such as telecom, military facilities, and power devices used in automobiles. In telecom applications, it can be used to protect voice and data lines from damaging transients and crosstalk. In military applications, it can be used to protect sensitive computer equipment from voltage disturbances. Finally, the AK10-170C can also be used to protect automotive power devices from transients caused by switching, braking, and other vehicle subsystems.

The AK10-170C works principle is based on the same principles of operation as all other TVS diodes. When an over-voltage transient event occurs, the diode will begin to conduct current, thereby protecting all other components downstream of the diode. The peak instantaneous voltage of the diode is limited to the diode\'s breakdown voltage. This means that all transients and spikes above this voltage will be limited by the AK10-170C. After the transient has passed, the AK10-170C acts as an open circuit, thereby allowing normal circuit operation.

In order to ensure optimum performance, it is important to install the diode as close as possible to the component that needs to be protected. This will help to limit the amount of voltage that can reach the protected component in case of a surge event. The AK10-170C can also be installed in parallel with other types of standard protection components such as capacitors or fuses, to provide complete protection for the equipment.

The AK10-170C is a reliable, cost-effective solution for protection against transient voltage events. Its peak surge current rating of 10A and peak power rating of 420W make it suitable for many high-voltage applications. Its ability to protect against both positive and negative transients means it can provide protection against a wide range of transient events. The AK10-170C is an ideal solution for protecting sensitive equipment from both isolated and harmonic disturbances arising from power line transients, lightning, or electrostatic discharge events.