Allicdata Part #: | ALLPMTW-ND |
Manufacturer Part#: |
ALLPMTW |
Price: | $ 15.95 |
Product Category: | RF/IF and RFID |
Manufacturer: | Laird Technologies IAS |
Short Description: | BRACKET WALL UNIV DIRECTLINK ANT |
More Detail: | N/A |
DataSheet: | ALLPMTW Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Not applicable / Not applicable |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
25 +: | $ 14.50130 |
Series: | * |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Moisture Sensitivity Level (MSL): | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The ALLPMTW (Adaptive Load Pull Measurement and Tuning Workstation) supports a wide range of engineering applications that directly involve RF devices such as antennas, circuit boards, power amplifiers, interconnects, and signal sources. It is a powerful tool for optimizing the performance and measurement of a wide variety of RF devices. By integrating multiple measurement capabilities into one platform, it allows for the measurement of a variety of parameters, such as gain, stability, and gain compression, which can be critical for the operation of a device. In addition, the system supports the measurement of input and output signal quality, power, and noise characteristics, as well as the determination of voltage standing wave ratio (VSWR) and harmonic response.
Generally, the ALLPMTW works as a measurement platform designed to measure the electrical and mechanical behaviour of an RF component or device. The system consists of a signal path (measurement head), a power amplifier, a wave guide, a set of cables, and a control system. The signal path is responsible for the measurement and tuning of the component while the power amplifier is responsible for providing the necessary amplification for the measurement head. The wave guide is responsible for delivering the input signal to the component, and the cables are responsible for connecting the signal path and the power amplifier to the control system.
On the control system side, the ALLPMTW can be programmed with a variety of tools that allow it to carry out various measurements. Depending on the type of device that is being measured, different tools can be used. For example, a frequency response analyser is used for measuring the frequency response of a device, while an oscilloscope is used to measure the amplitude and phase response of a device, and a vector network analyser can be used for the optimization of power amplifier performance.
Another important aspect of the ALLPMTW is the ability to tune the component or device. This is done via the control system, which can be programmed to adjust the frequency, input power, and gain of the device. By making these changes, the performance of the device can be improved, and the desired output parameters can be achieved.
The ALLPMTW is a powerful tool that can be used for the measurement and optimization of a wide variety of RF components and devices. By combining multiple measurement capabilities into one platform, it allows engineers to quickly and easily perform various measurements and tune components to achieve the desired performance.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ALLPMTD | Laird Techno... | 21.85 $ | 1000 | KIT WALL MNT FOR S240790P... |
ALLPMTA | Laird Techno... | 21.11 $ | 1000 | KIT WALL MNT FOR 6X6" HOU... |
ALLPMTC | Laird Techno... | 18.83 $ | 1000 | KIT WALL MNT 4-5/8X6-1/2"... |
ALLPMTP | Laird Techno... | 15.32 $ | 1000 | BRACKET WALL UNIV DIRECTL... |
ALLPMTW | Laird Techno... | 15.95 $ | 1000 | BRACKET WALL UNIV DIRECTL... |
ALLPMTB | Laird Techno... | 22.86 $ | 1000 | KIT WALL MNT FOR 6X13" HO... |
ALLPMTE-001 | Laird Techno... | 31.33 $ | 1000 | MOUNT,BLACK, ALL PURPOSE |
ALLPMTE-002 | Laird Techno... | 27.44 $ | 1000 | MOUNT,WHITE, ALL PURPOSE |