AM1504F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Snap Action, Limit Switches

The AM1504F is a type of snap action switch and limit switch. This device is particularly useful in providing a signal that is sent when a set distance or pressure is reached. The signal can then be used to trigger an action such as an alarm, or a system shutdown. Snap action, limit switches are also referred to as pressure switches, as they are often used to detect when a certain amount of pressure has been reached and will send a signal accordingly.

The construction of a snap action, limit switch consists of a switch body, a plunger, a spring, a vane, and a contact block. The switch body houses the plunger, and the plunger is connected to the vane. The vane is attached to the contact block, which consists of a pair of electrical contacts. The spring is then attached to the plunger to provide the initial pressure that the switch needs to be held in the open position. The pressure that the switch is held in is adjustable through the amount of tension placed on the spring.

When the switch is in the open position, the plunger, vane, and contact block are all held in a slightly compressed state by the spring. As the pressure is applied, the plunger and vane move, pushing against the contact block. When the pressure reaches a certain point, the plunger snaps into the closed position, completing the circuit, and sending a signal that can be registered by a device or system. When the applied pressure is removed, the spring restores the switch to the open position, readying it to repeat the cycle.

The AM1504F is especially useful in applications such as level monitoring, or determining when a certain pressure or force has been reached. This can be extremely important in certain industrial or mechanical settings where safety systems must be triggered in response to a certain level or pressure being reached. This device can also be used to trigger alarms and shutdowns in mechanical systems to avoid catastrophic system failure.

The AM1504F is a reliable, cost-effective device for triggering switches in response to set distances and pressures. It is easy to install and maintain, and its adjustable pressure setting allows for greater flexibility in setting the exact amount of pressure required for the switch to be triggered. The AM1504F is a reliable and cost-effective device for triggering switches in applications where safety and efficiency are paramount.

The specific data is subject to PDF, and the above content is for reference