AMMC-3041-W50

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF mixers are components that are used as a bridge between devices sending and receiving radio frequency (RF) signals. They enable signals with frequencies that are different from one another to interact and be converted from one form to another. RF mixers connect signals with frequencies that are higher than the receiving device can handle to signals with frequencies that are lower than the transmitting device can handle. The AMMC-3041-W50 is a type of balanced mixer that is designed for applications requiring low spurious signals and high dynamic range.

The AMMC-3041-W50 is an integrated circuit single balanced mixer that operates from 800 MHz to 4000 MHz. It has a differential current input, an unbalanced single ended input, and a differential voltage output. It is equipped with diodes in the balanced configuration, which helps to increase the linearity. The device features excellent noise figure and high on-chip isolation, allowing it to be used in applications requiring high input impedance and high linearity. The AMMC-3041-W50 is a cost-effective solution for applications ranging from communications systems to diversified microwave applications.

The working principle of the AMMC-3041-W50 is based on RF frequency-mixing. Frequency-mixing occurs when two components with frequencies that are different from each other are combined to form one component with a frequency that is the sum and difference of the two components being combined. In the case of the AMMC-3041-W50, the input signal is mixed with a generator signal of the same frequency at the diode. This mixing results in a sum and a difference frequency, which are then amplified and filtered by the amplifier and filter stages, and the output consists of the sum and difference signals. The AMMC-3041-W50 is designed to provide a high signal-to-noise ratio and low input and output VSWR for applications requiring high linearity.

The AMMC-3041-W50 is suitable for a variety of applications, including up-conversion and down-conversion of radio frequency signals, multi-octave receivers, modulation systems, automatic gain control systems, and instrumentation systems. It is also suitable for use as a low noise amplifier, VCO, or balanced mixer. The device is available in a variety of packages, including Diels-Alder, SIP, SOT, and SMT packages, and is capable of operating in temperatures ranging from -40°C to +85°C.

The AMMC-3041-W50 is an integrated circuit RF mixer that is designed for applications requiring low spurious signals and high dynamic range. It is based on the principle of RF frequency-mixing and features exceptional noise figure and high on-chip isolation. It is suitable for applications such as up-conversion and down-conversion of radio frequency signals, modulation systems, AGC systems, and instrumentation systems. The device is available in a variety of packages and can operate in temperatures ranging from -40°C to +85°C.

The specific data is subject to PDF, and the above content is for reference