AMMC-6630-W50

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators: AMMC-6630-W50 Application Field and Working Principle

An attenuator is a device used to reduce the level of an electronic signal without distorting its waveform. The AMMC-6630-W50 is an attenuator manufactured by MINI-CIRCUITS and used to reduce the level of signal power, such as in radio frequency (RF) circuits. This low-pass filter is a high-performance, fixed-attenuator designed to minimize insertion loss, while providing high linearity in the process.

Application Field of the AMMC-6630-W50

The AMMC-6630-W50 is specifically designed for application in a broad range of wireless and communication systems. It is typically used as a passive termination device for protection against damaging reflections generated from mismatched components, including both active and passive devices. This attenuator also provides level control for various applications, including mobile terminals, base stations, and cordless phones.

The AMMC-6630-W50 is also designed for use in laboratory and defense experiments, for the purpose of signal level control and ultra-low loss measurements. It is ideal for applications such as radio astronomy, satellite communication, radar systems, and broadcast systems.

Working Principle of the AMMC-6630-W50

The AMMC-6630-W50 operates on the principle of using a resistive network to reduce the level of a signal, with minimal distortion to the waveform of the signal. The resistor network used is a combination of three high-precision track joined metal film resistors, which are connected in a series the RF signal is then applied across the three resistors.

The combination of the resistors in series form an attenuator, which reduces the signal attenuation level (attenuation ratio) of the RF signal, thus resulting in a reduced signal level. The reduction in signal level is achieved by dissipating some of the signal power as heat. As a result, the signal power level decreases as it passes through the attenuator.

The characteristic of the AMMC-6630-W50 allows for precise and consistent adjustable attenuators, with high linearity and low insertion loss. This attenuator has a nominal operating frequency range of DC to 6 GHz, with a maximum attenuation level of approximately 29 dB. Additionally, it features excellent thermal stability and tolerance of up to 0.2 dB. The attenuator is designed to operate at both high and low impedance levels, with its maximum input power rated at 50 Watts (W).

Conclusion

The AMMC-6630-W50 is an excellent attenuator, which is designed to reduce the level of a signal with minimal distortion to the waveform of the signal. The working principle of the attenuator is based on a series network of three high-precision metal films resistors, that dissipate some of the signal power as heat, resulting in a decreased signal power level.

This attenuator has been designed for application in a range of wireless and communication systems, and is ideal for radio astronomy, satellite communication, radar systems, and broadcast systems. With its exceptional thermal stability and tolerance, the AMMC-6630-W50 makes a reliable and cost-effective attenuation solution.

The specific data is subject to PDF, and the above content is for reference