AMMC-6345-W50

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF amplifiers, such as the AMMC-6345-W50, are devices used to amplify high-frequency radio signals. They are designed to improve signal quality, reduce noise, and increase the effective Signal-to-Noise Ratio (SNR) of communication systems. The AMMC-6345-W50 is a transistor-based class A/AB broadband amplifier designed for use in both commercial and military applications.

This particular amplifier operates in the frequency range of up to 18 GHz with a power gain of more than 20dB in the bandwidth of 500 MHz to 26.5 GHz. It also features low noise figure of less than 6 dB. Its power output characteristics can be adjusted with the aid of a three-position control switch.

The AMMC-6345-W50 is designed to amplify radio signals such as base station transmitters, mobile communication systems, microwave data links, satellite communication systems, satellite ground systems, remote radio heads, space systems, and radar systems. It is also useful in the operation of low noise amplifiers (LNAs), transverters, and related monitor and control systems. Additionally, it can be used in phased array applications.

When used in applications such as LNAs, the AMMC-6345-W50 can provide low noise amplification and low imaginary frequency response. This is achieved by means of the amplifier’s wide frequency range with excellent gain flatness. As a result, the amplifier has a high dynamic range and can operate in both linear and saturated modes.

The working principle of the AMMC-6345-W50 is simple. The device is designed to convert a low power input signal into a significantly higher power output signal, by means of various components such as transistors and resistors. The amplifier is made up of several stages, including an input stage, an intermediate stage, and an output stage. The individual stages are designed to amplify the signal, increase the power level, and reduce the noise level.

Once the signal enters the input stage, it goes through a gain stage and is then passed through the transformer. The signal then enters the intermediate stage where the gain is adjusted to optimal power levels and the noise level is reduced. The signal is then split between the emitter and collector of the output device. The output of the amplifier is then coupled to an output device which amplifies the signal further.

In general, the AMMC-6345-W50 is an ideal amplifier for many applications due to its high gain, low noise, and wide frequency range. Additionally, its ability to adjust the power output with the aid of a three-position control switch makes it a very versatile device.

The specific data is subject to PDF, and the above content is for reference