AMMP-6640-TR2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are electrical devices used to reduce the signal strength of electrical energy waveforms. The most common type of attenuator is a pair of circuit elements connected in series, typically resistors, that are designed to consume the energy from the signal, reducing the amplitude of the waveform without disturbing its signal-to-noise ratio. The AMMP-6640-TR2G is a special type of attenuator commonly used in radio frequency (RF) applications. This article will look at how the device is used in these applications and its working principle.

The AMMP-6640-TR2G is a Surface-Mount-Device (SMD) designed to keep RF signals within a certain range. It is specifically designed for use in RF wireless systems, where it is used to attenuate signals. It is capable of up to 10 watts of RF power, with a wide frequency range from 5 MHz to 10 GHz. The device operates in a linear manner and provides a precise amount of power reduction over a wide frequency range, with a maximum output voltage of 75 volts.

The AMMP-6640-TR2G is typically used in wireless systems when a signal needs to be reduced, yet without introducing distortion. The device is used in a number of applications such as cellular base stations, in-building DAS (Distributed Antenna Systems), wireless backhaul systems, RF test and measurement, and microwave radios. It is designed for both technical and commercial markets, and has a wide range of applications, from consumer to military.

The working principle of the AMMP-6640-TR2G is based on the fact that it consists of two circuit elements connected in series. The device is designed to introduce a small amount of resistance into the signal path, which reduces the amplitude of the waveform without disturbing its signal-to-noise ratio. This is done by converting the high-frequency energy from the signal into heat, thus dissipating the power of the waveform.

The device also operates in a linear manner, meaning that the attenuation response increases linearly with the input voltage. This is achieved by controlling the resistance of the device to match the frequency of the input signal. The resistance can be adjusted between 0 and 5 ohms, allowing for precise control of the signal strength.

In addition, the device also offers good linearity and repeatability in its attenuation response. It is also designed to provide a wide frequency range for multiple application areas. The device operates at low power consumption, making it suitable for battery-powered applications such as cellular base stations.

Overall, the AMMP-6640-TR2G is an ideal choice for applications where a signal needs to be attenuated without introducing distortion. The device is designed for both technical and commercial markets and provides precise control of the signal strength over a wide frequency range. It is easy to install and operates at low power consumption, making it suitable for many wireless applications.

The specific data is subject to PDF, and the above content is for reference