Allicdata Part #: | ANVIL.105-HR12ID-ND |
Manufacturer Part#: |
ANVIL.105-HR12 ID |
Price: | $ 108.86 |
Product Category: | Tools |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | TOOL ACC |
More Detail: | N/A |
DataSheet: | ANVIL.105-HR12 ID Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 98.96040 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The ANVIL.105-HR12ID application field and its functional principle is not often discussed in the crimpers, applicators, presses and accessories field, but it is an extremely important device within this field. This tool is designed to perform annealing, heat-treatment, forging, and even some forms of machining operations on small to medium sized metal parts. It is also capable of joining and detaching different pieces of metal, allowing for the easy assembly and disassembly of parts without the use of a manual hammer.
The ANVIL.105-HR12ID’s primary means of operation is the use of a hydraulic cylinder. This cylinder is operated manually by a lever that is typically located at the base of the tool. This lever triggers two opposing hydraulic pistons located inside the cylinder. These pistons act in opposition to each other, locking the metal part in place against the anvil. The pressure and force applied by the pistons allows for precise and accurate heat treatment and forming operations to be carried out.
The ANVIL.105-HR12ID has been specifically designed to produce an even level of heat and pressure across the entire duration of the metalworking application. This is accomplished with the utilization of specially made sensors and gas flow measuring systems located within the system. These sensors allow for the system to automatically adjust to different temperatures and pressures to ensure the most accurate and consistent results.
The ANVIL.105-HR12ID also comes equipped with an adjustable hydraulic cylinder pressure regulator. This regulator is designed to be used best practice with a specific setting, preset in order to properly operate the tool and generate the required level of force on the workpiece. This setting can be overridden and adjusted as necessary, based on the user’s requirements and the desired results.
The ANVIL.105-HR12ID is highly regarded for its temperature and pressure accuracy and consistency. This is due to its sensor-based system, which is able to perfectly control the temperature and pressure of the parts being worked upon. This system can be adjusted to any desired temperature and pressure, and is also able to be regulated based on the result of previous thermal treatments. The system is also designed to be easy to operate, requiring minimal manual labor.
Users of the ANVIL.105-HR12ID have noted its operational accuracy and thermal accuracy, as well as its simple and convenient set-up, operation, and maintenance. It is also noted as being economical, eliminating the need for costly human labor and expensive machining tools. In addition to its economic efficiency, the ANVIL.105-HR12ID is also capable of completing a wide variety of metalworking tasks, making it a highly versatile and valuable tool for any metalworking operation.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ANVIL 103-RPC | Hirose Elect... | 108.86 $ | 1000 | TOOL ACC |
ANVIL 105-A3-36 | Hirose Elect... | 108.86 $ | 1000 | TOOL ACC |
ANVIL 105-DF1B-R | Hirose Elect... | 108.86 $ | 1000 | TOOL ACC |
ANVIL 105-DF3EP2428 | Hirose Elect... | 108.86 $ | 1000 | TOOL ACC |
ANVIL 105-HR12 | Hirose Elect... | 108.86 $ | 1000 | TOOL ACC |
ANVIL 105-RP19-3 | Hirose Elect... | 108.86 $ | 1000 | TOOL ACC |
ANVIL 109-DF1B-R | Hirose Elect... | 108.86 $ | 1000 | TOOL ACC |
ANVIL.105-HR12 ID | Hirose Elect... | 108.86 $ | 1000 | TOOL ACC |
ANVIL105-DF1B-PR | Hirose Elect... | 108.86 $ | 1000 | TOOL ACC |
ANVIL105-GTM3 | Hirose Elect... | 108.86 $ | 1000 | TOOL ACC |
ANVIL105-RP6C-2 | Hirose Elect... | 108.86 $ | 1000 | TOOL ACC |
ANVILFORDF11TA242 | Hirose Elect... | 0.0 $ | 1000 | ANVIL FOR DF11-TA2428HC 9... |
RETAINER PLATE/STRIP CUTOFF
GAGE PIN ASSEMBLY
LOCATOR MINI EJECTOR
MEP-6T TOUCH SCREEN/MESSAGE SYST
SEATING TI ASSEMBLY
INSET TL ASSY 5 PR 14 COLUMN