AP3064P-G1

Voltage - Output:	60V
Supplier Device Package:	16-DIP
Package / Case:	16-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C (TA)
Applications:	Backlight
Dimming:	PWM
Frequency:	100kHz ~ 1MHz
Current - Output / Channel:	220mA
Series:	--
Voltage - Supply (Max):	33V
Voltage - Supply (Min):	4.5V
Number of Outputs:	4
Internal Switch(s):	No
Topology:	Step-Up (Boost)
Type:	DC DC Controller
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AP3064P-G1 application field and working principle

The AP3064P-G1 is a small 3-channel constant current linear LED driver (PMIC-LED Driver) designed for mobile and portable devices. It integrates a charge pump and constant current linear driving circuit, which converts the input DC voltage into three adjustable constant currents. Thus, it can operate with a wide input voltage range of 2.7V to 5.5V and supply each of the 3 channels independently. It is an ideal solution for driving LEDs that require accurate configuration for a variety of lighting products and architectures, such as smartphone keyboards, key backlights and small screen backlights.

Advantage of AP3064P-G1 PMIC-LED Driver

The AP3064P-G1 integrates two low-dropout (LDO) linear regulators, two high-voltage (HV) circuits, and two low-voltage (LV) circuits. The two LDOs provide a regulated voltage for the internal independent regulators. The HV circuit is used to provide 15V, while the LV circuit provides an adjustable voltage to each of the three LED channels. This unique combination delivers the high efficiency that competent designers seek when developing new lighting applications.

Features and Benefits of AP3064P-G1 PMIC-LED Driver

The AP3064P-G1 integrates multiple features to enable a flexible LED drive solution. It has an output voltage range of 0 to 10V and an output current range of 0 to 20mA. Its accurate output current is adjustable via logic I2C commands and is compatible with I2C command formats from most MCU. It offers soft start and over current protection, as well as pulse frequency modulation (PFM) for dimming control. The AP3064P-G1 also provides two enable/disable inputs for enabling or disabling the chip and two LEDs for indicating the chip\'s internal status.

Working Principle Of AP3064P-G1 PMIC-LED Driver

The AP3064P-G1 is designed with a buck-boost converter and a linear regulator. The buck-boost converter takes an input voltage between 2.7V to 5.5V and outputs a regulated 15V. This voltage is used by the linear regulator to power the internal components. The linear regulator adjusts the voltage and current output of each LED channel to match the desired brightness levels.When the AP3064P-G1 is enabled, it receives I2C commands from the MCU to control the output of each LED channel. The AP3064P-G1 provides two PWM input signals to enable dimming control. The frequency of the PWM signal can be adjusted to control the dimming level. Additionally, the AP3064P-G1 provides soft-start and over-current protection to ensure proper operation.

Conclusion of AP3064P-G1 PMIC-LED Driver

The AP3064P-G1 is an ideal solution for driving linear LEDs for a variety of lighting products, such as keyboard backlights, screen backlights, dual and/or single channel displays. The AP3064P-G1 has a wide input voltage range of 2.7V to 5.5V and provides three adjustable constant currents for each channel. It also has two enable/disable inputs for easy control and two LEDs to indicate the internal status. Its unique combination of features and benefits makes the AP3064P-G1 the ideal choice for multiple lighting applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description