APHBM2012LVBDSEKJ3C

LED indication is widely used in a variety of applications, due to its long life, low cost, and low power dissipation. It has become an important part of modern electronics. Discrete indicator LED’s are used to indicate simple on/off states, and also to indicate three or four different states, often with an additional color to indicate each state.

APHBM2012LVBDSEKJ3C is one such discrete indicator LED used widely in automotive, medical and industrial applications. The device is a high brightness surface mount LED with a wide viewing angle. The APHBM2012LVBDSEKJ3C consists of a single light emitting diode housed in a rectangular package. The package size is 3 x 3 mm, allowing for a small footprint.

The working principle of the APHBM2012LVBDSEKJ3C is relatively simple. The device is a “bi-stable” device, meaning that it will remain in either the “on” or “off” state until it is triggered by an external control signal. When triggered, the device will switch from one state to the other. The APHBM2012LVBDSEKJ3C has three states available: “on”, “off” and “spinning”. The “spinning” state is used to indicate multiple conditions.

The APHBM2012LVBDSEKJ3C has two input terminals, namely “C1” and “C2”. The “C1” terminal is the trigger terminal, while the “C2” terminal is the control terminal. When a low voltage, or ground potential, is applied to the “C1” terminal, the LED will switch to the “on” state. The current through the LED will be determined by the resistance in the driving source. When a high voltage, typically 5V, is applied to the “C2” terminal, the LED will switch to the “off” state. The “spinning” state is achieved by applying a voltage, usually between 0.8V and 2.0V, to both the “C1” and “C2” terminals simultaneously.

The APHBM2012LVBDSEKJ3C is a discrete indicator LED that is ideal for applications that require the indication of multiple conditions, such as switches, relays and lights, especially in tight spaces where limited room is available. The device is rated for a maximum current of 15mA, a voltage range of 3V to 6V, an operating temperature range of -25°C to +75°C, and a storage temperature of -40°C to +85°C. It is also RoHS and EEE compliant.

The APHBM2012LVBDSEKJ3C is a versatile and reliable discrete indicator LED that can be used in a variety of applications. It is available in several colors, including green, red, yellow and orange, allowing for customization to meet the needs of any project. The device is also capable of multi-state indications, which makes it ideal for applications that require multiple statuses to be indicated simultaneously.