APSG250ELL181MHB5S

Series:	NPCAP™-PSG
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Type:	Polymer
Capacitance:	180µF
Tolerance:	±20%
Voltage - Rated:	25V
ESR (Equivalent Series Resistance):	16 mOhm
Lifetime @ Temp.:	15000 Hrs @ 105°C
Operating Temperature:	-55°C ~ 105°C
Ratings:	--
Applications:	General Purpose
Ripple Current @ High Frequency:	4.65A @ 100kHz
Lead Spacing:	0.138" (3.50mm)
Size / Dimension:	0.315" Dia (8.00mm)
Height - Seated (Max):	0.512" (13.00mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum - Polymer Capacitors are one of the most popular and widely used electrical components today. These capacitors offer several advantages over traditional electrolytic capacitors such as high capacitance and higher voltage ratings, longer life, and lower ESR values. The APSG250ELL181MHB5S is a low-voltage aluminum - polymer capacitor most commonly used in consumer electronics, automotive electronics, or other high-power applications.The APSG250ELL181MHB5S is an aluminum - polymer capacitor that has a rated capacitance of 250 µF at 6.3 VDC. This capacitor has a standard operating temperature range of -40 to +85 degrees Celsius and an extended operating temperature range of -55 to +105 degrees Celsius. The capacitor also has a rated ripple current of 170 mA at 126 Hz and a rated surge current of 850 mA.The APSG250ELL181MHB5S works on the same basic principle of all capacitors, storing electrical energy to be used later. This certain capacitor stores energy by using two layers of aluminum foil separated by a thin layer of polymer. When voltage is applied across the two layers of foil, the electric field created causes an accumulation of electric charge that is stored. The layers of aluminum foil form the two plates of the capacitor, and the polymer material provides an insulating dielectric that maintains a certain minimum capacitance when the plates are subjected to electric field. When the electric field is removed, the charge is released, which is how the capacitor works as an energy storage device.The APSG250ELL181MHB5S aluminum - polymer capacitor has a long life due to the dielectric material used. The polymer material used in the capacitor has a higher dielectric constant than that of traditional electrolytic capacitors, meaning the capacitor can store more electric energy while still being able to sustain high electric fields. This capacitor also has the benefit of being resistant to electric leakage due to its low ESR values and high temperature over-voltage specification, meaning it will perform longer than traditional electrolytic capacitors in most applications.Although the APSG250ELL181MHB5S capacitor has many benefits over traditional electrolytic capacitors, it is important to note that it is not suitable for all applications. This capacitor should not be used in applications with high electric currents, as the capacitor’s capacitance will be reduced under the heavy load. The capacitor is also not suitable for applications with high switching frequencies. The capacitor should not be used in any application exceeding the rated voltage and temperature ranges, as it can cause the capacitor to fail or even explode.The APSG250ELL181MHB5S aluminum - polymer capacitor is a popular choice among electronics designers due to its high capacitance, low ESR values, and long life. The capacitor is typically used in consumer electronics, automotive electronics, or other high-power applications. It is important to understand the limitations of the capacitor before using it in any application, as the wrong use of the capacitor can result in catastrophic failure.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description